Protective Thin Coatings Technology
暫譯: 保護性薄膜技術

硬質或保護性塗層在傳統和現代工業中被廣泛使用，並將在未來的製造中繼續發揮關鍵作用，特別是在微米和納米領域。《保護性薄膜技術》突顯了在保護性微米/納米尺度薄膜和塗層的製備、表徵和應用方面的發展和進步。

本書

- 涵蓋靈活硬質納米塗層的濺射技術、固體潤滑薄膜的沉積以及多層過渡金屬氮化物
- 描述硬質塗層的綜合納米機械表徵、硬質塗層的腐蝕和摩擦腐蝕，以及高熵合金薄膜和塗層
- 探討高溫應用的薄膜和塗層、鎂合金上的納米複合塗層，以及塗層性能與工業應用之間的關聯
- 涵蓋硬質塗層的各個方面，包括先進的濺射技術、結構表徵和模擬，以及應用

這本書是兩卷本中的第一卷《保護性薄膜與功能性薄膜技術》，將使從事半導體、光電技術、等離子體技術、固態能源儲存和5G等相關領域的行業專業人士和研究人員受益，並且對於學習電機、機械、化學和材料工程的高級學生也將有所幫助。

Professor Sam Zhang Shanyong (張善勇, better known as Sam Zhang, was born and brought up in the famous "City of Mountains" Chongqing, China. He received his Bachelor of Engineering in Materials in 1982 from Northeastern University (Shenyang, China), Master of Engineering in Materials in 1984 from Iron & Steel Research Institute (Beijing, China) and Ph.D. degree in Ceramics in 1991 from The University of Wisconsin-Madison, USA. He was a tenured full professor (since 2006) at the School of Mechanical and Aerospace Engineering, Nanyang Technological University. In January 2018, he joined School of Materials and Energy, Southwest University, Chongqing, China and assumed duty as Director of the Centre for Advanced Thin Film Materials and Devices of the university.

Dr. Jyh-Ming Ting is an AES Chair Professor of the Department of Materials Science and Engineering at National Cheng Kung University (NCKU) in Taiwan. He received a BS degree in Nuclear Engineering from National Tsing Hua University in Taiwan 1982, and completed MS and PhD works at the Department of Materials Science and Engineering in University of Cincinnati in 1987 and 1991, respectively. From 1990 to 1997, Dr. Ting worked at Applied Sciences, Inc. (ASI), as a Scientist and then the R&D Director. In August 1997, Dr. Ting became a faculty in NCKU working on various carbon materials and low-dimensional materials, and their (nano)composites. At the early stage, nano-scaled (composite) thin films and CNT were of interest. In particular, Prof. Ting developed and patented several novel techniques that allow the growth of aligned CNTs on metallic substrates, also holding the record of the growth rate until now. In recent years, in response to the serious issues related to environment, his research focuses on applying low-dimensional materials, mainly nanoparticles and 2D layered structures, and their composites, to energy generation/storage and photodegradation. More recently, Prof. is working in high entropy oxides. Prof. Ting has authored over 170 journal articles, given more than 30 invited talks and a few keynote speeches, holds more than 30 patents.

Dr. Wan-Yu Wu was born in Taipei, Taiwan. She obtained her Bachelor in 2000 and Ph.D. degrees in 2008 from Department of Materials Science and Engineering of National Cheng Kung University, Tainan, Taiwan. In 2010, Dr. Wu became an Assistant Professor in MingDao University in Taiwan where she was also a key member of the Surface & Engineering Research Center. In 2014, she joined the Department of Materials Science and Engineering in Da-Yeh University in Taiwan as an Associate Professor. Due to her well-recognized expertise in thin film and coating technology, Prof. Wu was commissioned to establish a Coatings Technology Research Center in Da-Yeh university. Over the years she has focused her research on thin film and nanostructure materials synthesized using HiPIMS deposition and wet chemistry processes, respectively. Prof. Wu also actively participates in professional society. She in the board of directors in Taiwan Association for Coating and Thin Film Technology (TACT). She also serves as a symposium chair in several international conferences including International Conference on Metallurgical Coatings and Thin Films (ICMCTF), ThinFilms Conference, and TACT International Thin Films Conference.

教授張善勇（Sam Zhang）出生並成長於中國著名的「山城」重慶。他於1982年在中國東北大學獲得材料工程學士學位，1984年在中國鋼鐵研究院獲得材料工程碩士學位，並於1991年在美國威斯康辛大學麥迪遜分校獲得陶瓷博士學位。他自2006年起擔任南洋理工大學機械與航空工程學院的終身教授。2018年1月，他加入中國重慶的西南大學材料與能源學院，並擔任該校先進薄膜材料與器件中心的主任。

丁志明博士是國立成功大學（NCKU）材料科學與工程系的AES講座教授。他於1982年在國立清華大學獲得核工程學士學位，並於1987年和1991年在辛辛那提大學材料科學與工程系完成碩士和博士學位。從1990年到1997年，丁博士在應用科學公司（Applied Sciences, Inc.）擔任科學家及研發主任。1997年8月，丁博士成為國立成功大學的教職員，專注於各種碳材料和低維材料及其（奈米）複合材料的研究。早期，他對奈米尺度的（複合）薄膜和碳奈米管（CNT）特別感興趣。丁教授開發並獲得多項專利，這些技術使得在金屬基材上生長對齊的碳奈米管成為可能，並保持至今的生長速率紀錄。近年來，針對環境相關的嚴重問題，他的研究重點轉向應用低維材料，主要是奈米顆粒和二維層狀結構及其複合材料，用於能源生成/儲存和光降解。最近，丁教授也在高熵氧化物方面進行研究。丁教授已發表超過170篇期刊文章，進行了30多場受邀演講和幾場主題演講，並擁有超過30項專利。

吳婉妤博士出生於台灣台北。她於2000年獲得國立成功大學材料科學與工程系的學士學位，並於2008年獲得博士學位。2010年，吳博士成為台灣明道大學的助理教授，並成為表面與工程研究中心的關鍵成員。2014年，她加入台灣大葉大學材料科學與工程系，擔任副教授。由於她在薄膜和塗層技術方面的專業知識受到廣泛認可，吳教授被委託在大葉大學建立塗層技術研究中心。多年來，她專注於使用高能量脈衝磁控濺射（HiPIMS）沉積和濕化學過程合成的薄膜和奈米結構材料的研究。吳教授也積極參與專業社團，擔任台灣塗層與薄膜技術協會（TACT）的董事會成員，並在多個國際會議中擔任研討會主席，包括國際金屬塗層與薄膜會議（ICMCTF）、薄膜會議和TACT國際薄膜會議。