Analysis of Thin-Walled Beams
Kim, Yoon Young, Jang, Gang-Won, Choi, Soomin
- 出版商: Springer
- 出版日期: 2024-05-22
- 售價: $7,050
- 貴賓價: 9.5 折 $6,698
- 語言: 英文
- 頁數: 373
- 裝訂: Quality Paper - also called trade paper
- ISBN: 9811977747
- ISBN-13: 9789811977749
海外代購書籍(需單獨結帳)
相關主題
商品描述
This book presents a comprehensive introduction to an advanced beam theory applicable to thin-walled beams of rectangular and arbitrarily-shaped cross-sections. Furthermore, it describes a unique beam-based approach to handling joint structures consisting of thin-walled beams, compiled here for the first time.
This higher-order beam theory (HoBT), developed by the authors over the past two decades, uses more than six degrees of freedom (DOFs) in contrast to the classical theories, which use only six DOFs. The additional degrees of freedom describe sectional deformations such as warping and distortion. This book presents a novel systematic procedure to derive the sectional deformations analytically for rectangular cross-sections and numerically for arbitrarily-shaped cross-sections.
This book is a must for structural/mechanical engineers who wish to understand and design structures involving thin-walled beams.
商品描述(中文翻譯)
本書介紹了一種適用於矩形和任意形狀截面的薄壁梁的先進梁理論的全面介紹。此外，它還首次編輯了一種獨特的基於梁的方法來處理由薄壁梁組成的接頭結構。
這種高階梁理論（HoBT）是作者在過去二十年中開發的，與傳統理論相比，使用了超過六個自由度（DOFs），而傳統理論僅使用六個DOFs。額外的自由度描述了截面變形，如翹曲和扭曲。本書提供了一種新穎的系統化程序，用於從解析上推導矩形截面的截面變形，並用於任意形狀截面的數值計算。
對於希望了解和設計涉及薄壁梁的結構的結構/機械工程師來說，本書是必讀之作。
作者簡介
Dist. Prof. Yoon Young Kim obtained his BS and MS degrees in Mechanical Design and Production Engineering from SNU (Seoul National University) in 1981 and 1983. He earned his Ph.D. degree from Stanford University in 1989. He joined SNU in 1991 as a faculty member and is now a distinguished professor at SNU.
Prof. Gang Won Jang is a professor of Mechanical Engineering at Sejong University. He obtained his BS and MS degrees in the Department of Mechanical and Aerospace Engineering at SNU. He continued his Ph.D. at the same university and earned the degree in 2004. He started his academic career by joining Kunsan National University as an assistant professor in 2004. He was a postdoctoral researcher at the Technical University of Delft in 2008.
Prof. Soomin Choi is an assistant professor of Mechanical Engineering at Kyungpook National University. He received his Ph.D. in Mechanical and Aerospace Engineering at SNU in 2016.
作者簡介(中文翻譯)
金潤英教授於1981年和1983年分別在首爾國立大學獲得機械設計和生產工程的學士和碩士學位。他於1989年在斯坦福大學獲得博士學位。他於1991年加入首爾國立大學擔任教職，現為該校的傑出教授。
張剛元教授是世宗大學機械工程系的教授。他在首爾國立大學機械與航空航天工程系獲得學士和碩士學位。他在同一所大學繼續攻讀博士學位，並於2004年獲得該學位。他於2004年加入昆山國立大學擔任助理教授，並於2008年在荷蘭代爾夫特理工大學擔任博士後研究員。
崔秀敏教授是慶北國立大學機械工程系的助理教授。他於2016年在首爾國立大學機械與航空航天工程系獲得博士學位。
