Trajectories of Launch and Reentry Systems (發射與再入系統的軌跡)

Teofilatto, Paolo

  • 出版商: Springer
  • 出版日期: 2025-01-21
  • 售價: $5,710
  • 貴賓價: 9.5$5,425
  • 語言: 英文
  • 頁數: 216
  • 裝訂: Hardcover - also called cloth, retail trade, or trade
  • ISBN: 3031757599
  • ISBN-13: 9783031757594
  • 尚未上市,無法訂購

相關主題

商品描述

This book examines ascent trajectories of space launch vehicles and re-entry trajectories of space capsules. The decommissioned SCOUT is used as a reference launcher and the reader will be introduced to various and detailed aspects of a launch vehicle that are not generally available in the literature, since this information is limited to internal industry and agency reports. The SCOUT data are used here as a study case and the reader will be able to generate a complete numerical code using the general equations of flight introduced in different reference systems, including the time-dependent parameters representing the launcher and its environment with a high degree of accuracy. The guidance parameters for injection into orbits of different semiaxes, eccentricities and inclinations are determined by guessed values obtained by original analytical formulae. These formulae allow a fast and sufficiently accurate design of the rocket trajectory within the atmosphere; in the exo-atmospheric flight closed form solutions of the optimal problem of injection into orbit are provided.

The second part of the book deals with re-entry trajectories. Basic analytical formulae for ballistic reentry are presented to evaluate the reentry trajectory and the capsule design in terms of critical parameters such as temperature and load peak. Entry corridors for ballistic reentry trajectories are then determined for various planets with atmospheres. The effect of lift is analysed to increase the entry corridors and guide the capsule to a target landing point. Autonomous and real-time guidance algorithms are developed for capsule of low aerodynamic efficiency and winged re-entry vehicles.

商品描述(中文翻譯)

本書探討了太空發射載具的上升軌跡以及太空艙的再入軌跡。已退役的 SCOUT 被用作參考發射器,讀者將接觸到發射載具的各種詳細面向,這些資訊在文獻中通常不易獲得,因為這些資料僅限於內部產業和機構報告。SCOUT 數據在此作為研究案例,讀者將能夠使用不同參考系中介紹的飛行一般方程式生成完整的數值程式碼,包括高精度的時間依賴參數,這些參數代表發射器及其環境。不同半長軸、偏心率和傾斜角的軌道注入指導參數是通過原始解析公式獲得的猜測值來確定的。這些公式允許在大氣層內快速且足夠準確地設計火箭軌跡;在超大氣層飛行中,提供了注入軌道的最佳問題的封閉形式解。

本書的第二部分處理再入軌跡。提出了基本的解析公式以評估再入軌跡和太空艙設計,重點在於關鍵參數如溫度和負載峰值。然後為各種具有大氣的行星確定了彈道再入軌跡的進入走廊。分析了升力的影響,以擴大進入走廊並引導太空艙到達目標著陸點。為低氣動效率的太空艙和有翼再入載具開發了自主和實時的指導演算法。

作者簡介

Paolo Teofilatto is professor of Flight Mechanics at Sapienza University of Rome, Italy, where he also served as dean of the School of Aerospace Engineering. He serves as full member of the International Academy of Astronautics (IAA), the Italian Space Agency, the Gran Sasso Scientific Institute Foundation, and the Italian Air Force Study Centre. He was responsible for the design, manufacture and launch of the Tigrisat and Stecco microsatellites, launched in 2014 and 2022 respectively.

作者簡介(中文翻譯)

Paolo Teofilatto 是義大利羅馬薩賓納大學的飛行力學教授,曾擔任航空工程學院院長。他是國際宇航學院(IAA)、義大利太空總署、格蘭薩索科學研究所基金會以及義大利空軍研究中心的正式成員。他負責設計、製造和發射 Tigrisat 和 Stecco 微衛星,分別於 2014 年和 2022 年發射。