Inverters and AC Drives: Control, Modeling, and Simulation Using Simulink (逆變器與交流驅動器：使用Simulink的控制、建模與模擬)

成功開發電力電子轉換器和轉換器供電的電動驅動系統涉及系統建模、分析輸出電壓、電流、電磁扭矩和機器速度，並在硬體實施之前進行必要的設計變更。《Inverters and AC Drives: Control, Modeling, and Simulation Using Simulink》為讀者提供了針對三相兩級、多級（包括模組化多級）、Z-source、Quasi Z-source、開關電感、開關電容和二極體輔助擴展升壓逆變器的單一、多三角載波、選擇性諧波消除和空間向量PWM技術的Simulink模型，六步驟逆變器供電的永磁同步電動機（PMSM）、無刷直流電動機（BLDCM）和感應電動機（IM）驅動，向量控制的PMSM、IM驅動，直接扭矩控制的逆變器供電IM驅動，以及模糊邏輯控制的轉換器供電AC驅動，並附有多個範例和案例研究。書中的附錄包括所有相關模型的源代碼、模型專案以及來自所有章節的選定模型專案的答案。

這本教科書將成為電氣和電子工程、電力電子以及AC驅動的高年級本科生和研究生的重要資源。對於這些領域的實務工程師和研究人員來說，它也是一本實用的參考書。

Narayanaswamy P.R. Iyer, CPEngg., Ph.D., is the Founder of Myna Electrical and Electronics Consultancy in Australia and has more than two decades of experience in the modeling of electrical and electronic circuits, power electronic converters, and electric drives using various software packages including MATLAB/Simulink, PSIM, PSCAD, PSPICE and MICROCAP. He received his Master of Engineering by research and Ph.D. in Power Electronics and Drives from the University of Technology Sydney (UTS), NSW, and Curtin University of Technology (CURTIN), Perth, WA, Australia, respectively. He received his B.Sc.(Engg.)(Electrical) and M.Sc.(Engg.)(Power Systems) degrees from the University of Kerala and the University of Madras, respectively. Dr. Iyer has worked as a part-time faculty member with the Department of Electrical Engineering at UNSW, Sydney, and UTS, as well as a full-time faculty member in the Department of Electrical Engineering at several engineering colleges and universities in India. He was a research fellow with the Faculty of Engineering, Power Electronics, Machines, and Control group at the University of Nottingham, UK, from July 2012 to March 2014. He has published several papers in this area with leading conferences and journals. He has to his credit several discoveries such as "Three Phase Clipped Sinusoid PWM Inverter," "Single Programmable and Dual Programmable Rectifier Using Three Phase Matrix Converter Topology," "A Novel AC to AC Converter Using a DC Link," and a submitted patent on "A Single Phase AC to PWM Single Phase AC and DC Converter" with alternative title "Swamy Converter." He is the author of the books Power Electronic Converters Interactive Modelling Using Simulink (CRC Press, 2018) and AC to AC Converters Modelling, Simulation and Real-Time Implementation Using Simulink (CRC Press, 2019). He is a Chartered Professional Engineer (CPEngg.) of Australia.

Narayanaswamy P.R. Iyer, CPEngg., Ph.D.，是澳大利亞Myna Electrical and Electronics Consultancy的創辦人，擁有超過二十年的經驗，專注於使用各種軟體包（包括MATLAB/Simulink、PSIM、PSCAD、PSPICE和MICROCAP）進行電氣和電子電路、電力電子轉換器及電動驅動的建模。他在新南威爾士州的悉尼科技大學（UTS）和西澳大利亞的科廷科技大學（CURTIN）分別獲得了工程碩士（研究）和電力電子及驅動的博士學位。他在喀拉拉邦大學和馬德拉斯大學分別獲得了電氣工程學士學位和電力系統碩士學位。Iyer博士曾在悉尼的UNSW和UTS的電氣工程系擔任兼職教職，並在印度多所工程學院和大學的電氣工程系擔任全職教職。他於2012年7月至2014年3月在英國諾丁漢大學的工程學院電力電子、機器和控制小組擔任研究員。他在這一領域發表了多篇論文，並參加了多個領先的會議和期刊。他的研究成果包括「三相剪切正弦波PWM逆變器」、「使用三相矩陣轉換器拓撲的單可編程和雙可編程整流器」、「一種使用直流連接的創新交流到交流轉換器」，以及一項提交的專利「單相交流到PWM單相交流和直流轉換器」，替代標題為「Swamy Converter」。他是《Power Electronic Converters Interactive Modelling Using Simulink》（CRC Press, 2018）和《AC to AC Converters Modelling, Simulation and Real-Time Implementation Using Simulink》（CRC Press, 2019）兩本書的作者。他是澳大利亞的特許專業工程師（CPEngg.）。