Routers and Routing Basics CCNA 2 Labs and Study Guide
暫譯: 路由器與路由基礎 CCNA 2 實驗與學習指南

Description

The completely revised and only authorized Labs and Study Guide for the Cisco Networking Academy Program CCNA 2 curriculum

• A portable classroom resource that supports the topics in the CCNA 2 curriculum aligning 1:1 with course modules
• Includes all the labs in the online curriculum as well as additional instructor-created challenge labs for extended learning and classroom exercises
• Written by leading Academy instructor Allan Johnson, who bring a fresh voice to the course material

The all-new Labs and Study Guide titles combine the best of the former Lab Companions and Engineering Journal and Workbooks with new features to improve the student's hands-on skills and reinforce the topics for each CCNA course. Routers and Routing Basics CCNA 2 Labs and Study Guide is a complete collection of the lab exercises specifically written for the CCNA 2 course in the Cisco Networking Academy Program, designed to give students hands-on experience in a particular concept or technology. Each lab contains an introductory overview, a preparation/tools required section, explanations of commands, and step-by-step instructions to reinforce the concepts introduced in the online course and covered in the Companion Guide. NEW: Challenge labs written by Academy instructors, tested in their classrooms will be included as additional or alternative labs. The Study Guide section is designed to provide additional exercises and activities to reinforce students' understanding of the course topics, preparing them for the course assessments. As a study guide it will also continue to provide ample writing opportunities to guide students into the habit of keeping notes on networking topics.

 

 

Table of Contents

Chapter 1               WANs and Routers

Study Guide  

WANs  

Routers  

Lab Exercises  

Curriculum Lab 1-1: Connecting Console Interfaces (1.2.5)  

Curriculum Lab 1-2: Connecting Router LAN Interfaces (1.2.6)  

Curriculum Lab 1-3: Connecting WAN Interfaces (1.2.7)  

Challenge Lab 1-4: Build a Two-Router Topology  

 

Chapter 2               Introduction to Routers  

Study Guide  

Cisco IOS and the IOS Command-Line Interface  

Starting, Configuring, Accessing, and Using a Router CLI  

Lab Exercises  

Command Reference  

Curriculum Lab 2-1: Router Configuration Using Setup (2.2.1)  

Curriculum Lab 2-2: Establishing a Console Session with HyperTerminal (2.2.4)  

Curriculum Lab 2-3: Command-Line Fundamentals (2.2.9)  

Comprehensive Lab 2-4: Exploring the Router and IOS  

Challenge Lab 2-5: Configure a Two-Router Topology  

 

Chapter 3               Configuring a Router  

Study Guide  

Configuring a Router for Basic Routing  

Documenting the Router Configuration  

Lab Exercises  

Command Reference  

Curriculum Lab 3-1: Command Modes and Router Identification (3.1.2)  

Curriculum Lab 3-2: Configuring Router Passwords (3.1.3)  

Curriculum Lab 3-3: Using Router show Commands (3.1.4)  

Curriculum Lab 3-4: Configuring a Serial Interface (3.1.5)  

Curriculum Lab 3-5: Making Configuration Changes (3.1.6)  

Curriculum Lab 3-6: Configuring an Ethernet Interface (3.1.7)  

Curriculum Lab 3-7: Configuring Interface
Descriptions (3.2.3)  

Curriculum Lab 3-8: Configuring Message of the Day (MOTD) (3.2.5)  

Curriculum Lab 3-9: Configuring Host Tables (3.2.7)  

Curriculum Lab 3-10: Backing Up Configuration Files (3.2.9)  

Comprehensive Lab 3-11: Basic Router Configuration and File Management  

Challenge Lab 3-12: Basic Router Configuration Challenge  

 

Chapter 4               Learning About Other Devices  

Study Guide  

Discovering Neighbors Using CDP  

Getting Information and Troubleshooting Remote Devices  

Lab Exercises  

Command Reference  

Curriculum Lab 4-1: Creating a Network Map Using CDP (4.1.4)  

Curriculum Lab 4-3: Establishing and Verifying a Telnet Connection (4.2.2)  

Curriculum Lab 4-4: Suspending and Disconnecting Telnet Sessions (4.2.3)  

Curriculum Lab 4-5: Advanced Telnet Operations (4.2.4)  

Curriculum Lab 4-6: Connectivity Tests–Ping (4.2.5a)  

Curriculum Lab 4-7: Connectivity Tests–Traceroute (4.2.5b)  

Curriculum Lab 4-8: Troubleshooting IP Address Issues (4.2.6)  

Comprehensive Lab 4-9: CDP Commands  

Comprehensive Lab 4-10: Network Troubleshooting Commands  

 

Chapter 5               Managing Cisco IOS Software  

Study Guide  

Router Boot Sequence and Loading IOS Images  

Managing Cisco Router IOS and Configuration Files  

Command Reference  

Lab 5-1: Using the boot system Command (5.1.3)  

Lab 5-2: Troubleshooting Configuration Register Boot Problems (5.1.5)  

Lab 5-3: Managing Configuration Files with TFTP (5.2.3)  

Lab 5-4: Managing IOS Images with TFTP (5.2.5)  

Lab 5-5: Password Recovery Procedures (5.2.6a)  

Lab 5-6: Managing IOS Images with ROMMON and Xmodem (5.2.6b)  

Challenge Lab 5-7: Use TFTP to Load IOS and Configuration File  

 

Chapter 6               Routing and Routing Protocols  

Study Guide  

Adding Connected and Static IP Routes  

Lab Exercises  

Command Reference  

Curriculum Lab 6-1: Configuring Static Routes (6.1.6)  

Comprehensive Lab 6-2: Static Routing with Migration to Dynamic Routing  

Challenge Lab 6-3: Static and Dynamic Routing Configuration  

 

Chapter 7               Distance Vector Routing Protocols  

Study Guide  

Avoiding Loops When Converging Using Distance Vector Routing Protocols  

Routing Information Protocol  

Lab Exercises  

Command Reference  

Lab 7-1: Configuring RIP (7.2.2)  

Lab 7-2: Troubleshooting RIP (7.2.6)  

Lab 7-3: Preventing Routing Updates Through an Interface (7.2.7)  

Lab 7-4: Load Balancing Across Multiple Paths (7.2.9)  

Lab 7-5: Configuring IGRP (7.3.5)  

Lab 7-6: Default Routing with RIP and IGRP (7.3.6)  

Lab 7-7: Unequal-Cost Load Balancing with IGRP (7.3.8)  

Comprehensive Lab 7-8: Advanced RIP Configuration and Troubleshooting  

Challenge Lab 7-9: RIP and Default Routing to ISP  

 

Chapter 8               TCP/IP Suite Error and Control Messages  

Study Guide  

TCP/IP Error Messages: ICMP  

Lab Exercises  

 

Chapter 9               Basic Router Troubleshooting  

Study Guide  

Examining the Routing Table  

Network Testing Methods and Tips  

Router and Routing Troubleshooting Tips  

Lab Exercises  

Command Reference  

Lab 9-1: Using show ip route to Examine Routing Tables (9.1.1)  

Lab 9-2: Gateway of Last Resort (9.1.2)  

Lab 9-3: Last Route Update (9.1.8)  

Lab 9-4: Troubleshooting Using ping and telnet (9.2.6)  

Lab 9-5: Troubleshooting Using traceroute (9.3.4)  

Lab 9-6: Troubleshooting Routing Issues with show ip route and show ip protocols (9.3.5)  

Lab 9-7: Troubleshooting Routing Issues with debug (9.3.7)  

Challenge Lab 9-8: Basic Routing Troubleshooting  

 

Chapter 10             Intermediate TCP/IP  

Study Guide  

TCP and UDP Operation  

Operation of Transport Layer Ports  

Lab Exercises  

Command Reference  

Curriculum Lab 10-1: Multiple Active Host Sessions (10.1.6)  

Curriculum Lab 10-2: Well-Known Port Numbers and Multiple Sessions (10.2.5)  

 

Chapter 11             Access Control Lists (ACLs)  

Study Guide  

Access Control List Fundamentals  

Access Control Configuration  

Lab Exercises  

Command Reference  

Lab 11-1: Configuring Standard Access Lists (11.2.1a)  

Lab 11-2: Standard ACLs (11.2.1b)  

Lab 11-3: Configuring Extended Access Lists (11.2.2a)  

Lab 11-4: Simple Extended Access Lists (11.2.2b)  

Lab 11-5: Configuring a Named Access List (11.2.3a)  

Lab 11-6: Simple DMZ Extended Access Lists (11.2.3b)  

Lab 11-7: Multiple Access Lists Functions (11.2.3c)  

Lab 11-8: VTY Restriction (11.2.6)  

Comprehensive Lab 11-9: Standard, Extended, and Named ACLs  

Challenge Lab 11-10a: Three Routers with Multiple ACL Configurations (Form A)  

Challenge Lab 11-10b: Three Routers with Multiple ACL Configurations (Form B)  

 

Appendix A            CCNA 2 Skills-Based Assessment Practice  

 

Appendix B            Router Interface Summary  

 

Appendix C            Erasing and Reloading the Router