CCNP Self-Study : Building Cisco Multilayer Switched Networks (BCMSN), 2/e
暫譯: CCNP 自學:建構 Cisco 多層交換網路 (BCMSN),第2版

Richard Froom, Balaji Sivasubramanian, Erum Frahim

  • 出版商: Cisco Press
  • 出版日期: 2004-04-08
  • 售價: $2,370
  • 貴賓價: 9.5$2,252
  • 語言: 英文
  • 頁數: 816
  • 裝訂: Hardcover
  • ISBN: 1587051508
  • ISBN-13: 9781587051500
  • 相關分類: Cisco
  • 已過版

買這商品的人也買了...

相關主題

商品描述

Learn CCNP BCMSN 642-811 network switching concepts with the only early stage book authorized by Cisco Systems.

CCNP Self-Study: Building Cisco Multilayer Switched Networks (BCMSN), 2nd Edition, is a self-study learning resource for CCNP and CCDP certification candidates preparing for the BCMSN 642-811 exam. This self-study resource includes sample questions and answers and lab excercises in each chapter. Including coverage of intermediate to advance networking switching technologies, this book helps CCNP candidates, as well as networking professionals, gain an understanding of switching fundamentals and best practices. Switching topics found in this book include Layer 2 and 3 switching, AVVID deployments in multilayer switching networks, QoS, CEF-based MLS, Catalyst switching architectures, and an introduction to Metro Ethernet. This is the only book authorized by Cisco Systems for early-stage, self-study learning of the BCMSN topics.

The CCNP certification indicates advanced or journeyman knowledge of networks. One of the four requirements to achieve CCNP certification is passing the BCMSN exam. Focused on intermediate-level switching issues, the BCMSN exam assesses a candidate's skill at building campus networks using multilayer switching technologies over high speed Ethernet. The exam addresses both routing and switching concepts, covering both Layer 2 and Layer 3 technologies including IP multicast. The BCMSN exam is also a requirement for CCDP certification.

CCIE candidates will also find this book useful for studying the switching portion of the CCIE written and lab tests.

This book is a complete rewrite of the best-selling Building Cisco Multilayer Switched Networks from Cisco Press from Cisco Press. In addition, this book contains two chapters outside the realm of the BCMSN switching exam, Introduction to Storage Networking and Introduction to Catalyst Switching Architectures

Table of Content:
Foreword.
Introduction.

   1. Introduction to Building Cisco Multilayer Switched Networks.

Hardware-Switching and Software-Switching Terminology. Multilayer Switching Overview. Enterprise Composite Network Model for Building Cisco Multilayer Switched Networks. Introducing the Cisco Catalyst Switches. Summary. Review Questions.

2. The Roles of Switches in Designing Cisco Multilayer Switched Networks.

Data-Link Technologies. Designing Cisco Multilayer Switched Networks Using the Cisco Catalyst Switches and Data-Link Technologies. Using the Cisco Catalyst Switches and Data-Link Technologies. Case Study: Designing a Cisco Multilayer Switched Network. Summary. Review Questions.

3. Initial Configuration and Troubleshooting of Cisco Multilayer Switches.

Comparing Cisco CatOS and Cisco IOS (Native Mode). Initial Configuration of Management Parameters of Cisco Catalyst Switches. Managing Catalyst Switch Configurations. Understanding the Cisco IOS File System and Software Images on Catalyst Switches. Upgrading Software Versions on Catalyst Switches. Overview of Converting Cisco CatOS to Cisco Native IOS. Basic Troubleshooting Practices. Initial Configuration Troubleshooting Tips. Summary. Configuration Exercise: Configuring a Cisco IOS-Based Catalyst Switch. Review Questions.

4. Implementing and Configuring VLANs.

VLANs. Troubleshooting VLANs. Private VLANs. VLAN Trunking. Configuring ISL and 802.1Q Trunking. VLAN Trunking Protocol. Summary. Configuration Exercise: Configuring VLAN, Trunking, and VTP in Multilayer Switched Networks. Review Questions.

5. Understanding and Configuring the 802.1D, 802.1s, and 802.1w Spanning-Tree Protocols.

Overview of the Spanning Tree Protocol. Bridging Loop. STP (IEEE 802.1D). STP Operation. Sample Scenario of STP Election Process. STP Topology Changes. Per VLAN Spanning Tree Plus. STP and IEEE 802.1Q Trunks. Configuring the Basic Parameters of PVST+. Verifying the STP Configuration. Rapid Spanning Tree Protocol. Multiple Spanning Tree. Configuring Basic Parameters of MST. Summary. Configuration Exercise: Configuring and Verifying Spanning-Tree Bridge Priorities and Spanning-Tree Port Cost. Configuration Exercise: Configuring and Verifying Spanning-Tree Bridge Priorities. Review Questions.

6. Understanding and Configuring Cisco-Specific Spanning Tree Protocol Features and Troubleshooting STP.

Enhancements to 802.1D Spanning Tree Protocol. Improving Spanning-Tree Resiliency. Preventing Forwarding Loops and Black Holes. Troubleshooting STP. Summary. Configuration Exercise: Configuring BackboneFast, UplinkFast, and Root Guard. Review Questions.

7. Configuring Layer 2 and Layer 3 Features.

EtherChannel. CDP. Port Security. Multiple Default Gateways. MAC Address Notification. Layer 3 Protocol Filtering. DHCP for Management IP Configuration. Debounce Timer Feature. Broadcast and Multicast Suppression. DHCP Snooping. Baby Giants and Jumbo Frame. UDLD and Aggressive Mode UDLD. Case Study: Function of Aggressive Mode UDLD. Summary. Configuration Exercise. Review Questions.

8. Understanding and Configuring Inter-VLAN Routing.

Introduction to Inter-VLAN Routing. IP Broadcast Forwarding. Summary. Configuration Exercise: Configuring Inter-VLAN Routing on Cisco IOS-Based Catalyst Switches. Review Questions.

9. Understanding and Configuring Multilayer Switching.

Understanding Traditional MLS. Understanding CEF-Based MLS. CEF-Based MLS Configuration, Verification, and Troubleshooting. Summary. Configuration Exercise: Troubleshooting CEF-Based MLS. Review Questions.

10. Understanding and Implementing Quality of Service in Cisco Multilayer Switched Networks.

The Need for QoS. QoS Service Models. Catalyst QoS Fundamentals. WAN QoS. QoS in the Multilayer Switched Network. Summary. Configuration Exercise: Configuring QoS on Cisco IOS-Based Catalyst Switches. Review Questions.

11. Deploying Multicast in the Multilayer Switched Network.

Introduction to Multicast. IP Multicast Protocol. Multicast Hardware-Based Switching Methods. Layer 2 Multicast Protocols. IP Multicast in the Multilayer Switched Network. Configuring Multicast. Monitoring and Verifying IP Multicast Traffic. Summary. Configuration Exercise: Configuring and Verifying Multicast in the Multilayer Switched Network. Review Questions.

12. Implementing High Availability Options in Multilayer Switches.

Achieving High Availability in Multilayer Switches. Implementing Redundant Supervisor Engines in Catalyst Switches. Router Redundancy Using Single Router Mode on the Catalyst 6500 Series of Switches. Implementing Redundant Supervisor Uplink Modules in Catalyst Switches. Implementing Redundant Power Supplies. Implementing Default Gateway Router Redundancy in Multilayer Switched Networks. Cisco IOS Server Load Balancing. Summary. Configuration Exercise: Configuring and Verifying RPR+ and HSRP. Review Questions.

13. Introduction to Deploying Cisco IP Telephony.

Network Design Recommendations for IP Telephony. Best Practices for Deploying IP Telephony in the Enterprise Composite Network Model. Summary. Configuration Exercise: Configuring Voice VLANs on a Catalyst Switch. Review Questions.

14. Implementing Management and Data Plane Security Features on Cisco Catalyst Switches.

Catalyst Switch Configurations for Security in Multilayer Switched Networks. Configuring AAA. Network Access Security Using IEEE 802.1X. Applying Security Using Access Control Lists. Understanding the Role of Private VLANs as a Security Feature. Understanding the Role of QoS as a Security Feature. Summary. Configuration Exercise: AAA, 802.1X, and VACLs. Review Questions.

15. Introduction to the Catalyst Switching Architectures.

Catalyst 6500. Catalyst 4500. Catalyst 3750. Catalyst 3550. Catalyst 2950. Summary. Review Questions.

16. Introduction to Storage Networking.

Storage Networking Overview. Storage Networking Protocols. Campus Network Integration. Cisco Storage Solutions. Summary. Review Questions.

17. Designing, Building, and Connecting Cisco Multilayer Switched Networks Using Metro Solutions.

Introduction to Cisco Metro Solutions. Metro Ethernet. Examining Metro Ethernet Tunneling. EoMPLS Implementation. Summary. Review Questions.

18. Performance and Connectivity Troubleshooting Tools for Multilayer Switches.

Techniques to Enhance Performance. Monitoring Performance with SPAN and VSPAN. Monitoring Performance with RSPAN. Monitoring Performance Using VACLs with the Capture Option. Troubleshooting Using L2 Traceroute. Performance Monitoring Using the Network Analysis Module in the Catalyst 6500 Family of Switches. Summary. Review Questions.

Appendix A: In-Depth Review of 802.3u and 802.3ad Auto-Negotiation.

Purpose of Auto-Negotiation. 10/100/1000-Mbps Auto-Negotiation Architecture. Summary.

Appendix B: Answers to Review Questions.

Index.

商品描述(中文翻譯)

學習 CCNP BCMSN 642-811 網路交換概念,這是唯一由 Cisco Systems 授權的早期階段書籍。

《CCNP 自學:建立 Cisco 多層交換網路 (BCMSN)》,第二版,是一個自學資源,專為準備 BCMSN 642-811 考試的 CCNP 和 CCDP 認證候選人設計。這本自學資源在每一章中都包含範例問題和答案以及實驗練習。涵蓋中級到高級的網路交換技術,本書幫助 CCNP 候選人以及網路專業人士理解交換的基本原理和最佳實踐。本書中涉及的交換主題包括第 2 層和第 3 層交換、AVVID 在多層交換網路中的部署、QoS、基於 CEF 的 MLS、Catalyst 交換架構,以及 Metro Ethernet 的介紹。這是唯一由 Cisco Systems 授權的早期階段自學 BCMSN 主題的書籍。

CCNP 認證表示對網路的進階或熟練知識。獲得 CCNP 認證的四個要求之一是通過 BCMSN 考試。BCMSN 考試專注於中級交換問題,評估候選人使用多層交換技術在高速以太網上構建校園網路的能力。該考試涵蓋路由和交換概念,包括第 2 層和第 3 層技術,包括 IP 多播。BCMSN 考試也是 CCDP 認證的要求之一。

CCIE 候選人也會發現這本書對於學習 CCIE 書面和實驗測試的交換部分非常有用。

這本書是對 Cisco Press 的暢銷書《建立 Cisco 多層交換網路》的完整重寫。此外,本書包含兩章不在 BCMSN 交換考試範疇內的內容,分別是《存儲網路介紹》和《Catalyst 交換架構介紹》。

目錄:
前言。
介紹。

1. 建立 Cisco 多層交換網路的介紹。
硬體交換和軟體交換術語。多層交換概述。建立 Cisco 多層交換網路的企業綜合網路模型。介紹 Cisco Catalyst 交換機。總結。複習問題。

2. 交換機在設計 Cisco 多層交換網路中的角色。
數據鏈路技術。使用 Cisco Catalyst 交換機和數據鏈路技術設計 Cisco 多層交換網路。使用 Cisco Catalyst 交換機和數據鏈路技術。案例研究:設計 Cisco 多層交換網路。總結。複習問題。

3. Cisco 多層交換機的初始配置和故障排除。
比較 Cisco CatOS 和 Cisco IOS(原生模式)。Cisco Catalyst 交換機管理參數的初始配置。管理 Catalyst 交換機配置。理解 Cisco IOS 文件系統和 Catalyst 交換機上的軟體映像。升級 Catalyst 交換機上的軟體版本。將 Cisco CatOS 轉換為 Cisco 原生 IOS 的概述。基本故障排除實踐。初始配置故障排除提示。總結。配置練習:配置基於 Cisco IOS 的 Catalyst 交換機。複習問題。

4. 實施和配置 VLAN。
VLAN。故障排除 VLAN。私有 VLAN。VLAN 標幟。配置 ISL 和 802.1Q 標幟。VLAN 標幟協議。總結。配置練習:在多層交換網路中配置 VLAN、標幟和 VTP。複習問題。

5. 理解和配置 802.1D、802.1s 和 802.1w 生成樹協議。
生成樹協議概述。橋接迴路。STP(IEEE 802.1D)。STP 操作。STP 選舉過程的範例場景。STP 拓撲變更。每 VLAN 生成樹加。STP 和 IEEE 802.1Q 標幟。配置 PVST+ 的基本參數。驗證 STP 配置。快速生成樹協議。多重生成樹。配置 MST 的基本參數。總結。配置練習:配置和驗證生成樹橋接優先級和生成樹端口成本。配置練習:配置和驗證生成樹橋接優先級。複習問題。

6. 理解和配置 Cisco 特定的生成樹協議功能及故障排除 STP。
對 802.1D 生成樹協議的增強。提高生成樹的韌性。防止轉發迴路和黑洞。故障排除 STP。總結。配置練習:配置 BackboneFast、UplinkFast 和 Root Guard。複習問題。

7. 配置第 2 層和第 3 層功能。
EtherChannel。CDP。端口安全性。多個預設網關。MAC 地址通知。第 3 層協議過濾。管理 IP 配置的 DHCP。去彈跳計時器功能。廣播和多播抑制。DHCP Snooping。Baby Giants 和 Jumbo Frame。UDLD 和 Aggressive Mode UDLD。案例研究:Aggressive Mode UDLD 的功能。總結。配置練習。複習問題。

8. 理解和配置 VLAN 之間的路由。
VLAN 之間路由的介紹。IP 廣播轉發。總結。配置練習:在基於 Cisco IOS 的 Catalyst 交換機上配置 VLAN 之間的路由。複習問題。

9. 理解和配置多層交換。
理解傳統 MLS。理解基於 CEF 的 MLS。基於 CEF 的 MLS 配置、驗證和故障排除。總結。配置練習:故障排除基於 CEF 的 MLS。複習問題。

10. 理解和實施 Cisco 多層交換網路中的服務質量。
QoS 的需求。QoS 服務模型。Catalyst QoS 基礎。WAN QoS。多層交換網路中的 QoS。總結。配置練習:在基於 Cisco IOS 的 Catalyst 交換機上配置 QoS。複習問題。

11. 在多層交換網路中部署多播。
多播的介紹。IP 多播協議。基於硬體的多播交換方法。第 2 層多播協議。多層交換網路中的 IP 多播。配置多播。監控和驗證 IP 多播流量。總結。配置練習:在多層交換網路中配置和驗證多播。複習問題。

12. 在多層交換機中實施高可用性選項。
在多層交換機中實現高可用性。在 Catalyst 交換機中實施冗餘主管引擎。使用 Catalyst 6500 系列交換機的單路由器模式進行路由冗餘。在 Catalyst 交換機中實施冗餘主管上行模組。實施冗餘電源供應。實施多層交換網路中的預設網關路由器冗餘。Cisco IOS 伺服器負載平衡。總結。配置練習:配置和驗證 RPR+ 和 HSRP。複習問題。

13. 部署 Cisco IP 語音的介紹。
IP 語音的網路設計建議。在企業綜合網路模型中部署 IP 語音的最佳實踐。總結。配置練習:在 Catalyst 交換機上配置語音 VLAN。複習問題。

14. 在 Cisco Catalyst 交換機上實施管理和數據平面安全功能。
在多層交換網路中進行安全的 Catalyst 交換機配置。配置 AAA。使用 IEEE 802.1X 的網路訪問安全性。使用存取控制列表應用安全性。理解私有 VLAN 作為安全功能的角色。理解 QoS 作為安全功能的角色。總結。配置練習:AAA、802.1X 和 VACLs。複習問題。

15. Catalyst 交換架構的介紹。
Catalyst 6500。Catalyst 4500。Catalyst 3750。Catalyst 3550。Catalyst 2950。總結。複習問題。

16. 存儲網路的介紹。
存儲網路概述。存儲網路協議。校園網路整合。Cisco 存儲解決方案。總結。複習問題。

17. 使用 Metro 解決方案設計、建設和連接 Cisco 多層交換網路。
Cisco Metro 解決方案的介紹。Metro Ethernet。檢查 Metro Ethernet 隧道。EoMPLS 實施。總結。複習問題。

18. 多層交換機的性能和連接故障排除工具。
增強性能的技術。使用 SPAN 和 VSPAN 監控性能。使用 RSPAN 監控性能。使用 VACLs 和捕獲選項監控性能。使用 L2 Traceroute 進行故障排除。使用 Catalyst 6500 系列交換機中的網路分析模組進行性能監控。總結。複習問題。

附錄 A:802.3u 和 802.3ad 自動協商的深入回顧。
自動協商的目的。10/100/1000-Mbps 自動協商架構。總結。

附錄 B:複習問題的答案。
索引。