Induction Machines Handbook: Transients, Control Principles, Design and Testing
暫譯: 感應機手冊：暫態、控制原則、設計與測試

Boldea, Ion

Induction Machines Handbook: Transients, Control Principles, Design and Testing
  • 出版商: CRC
  • 出版日期: 2024-11-07
  • 售價: $2,300
  • 貴賓價: 9.5 折 $2,185
  • 語言: 英文
  • 頁數: 456
  • 裝訂: Quality Paper - also called trade paper
  • ISBN: 1032582693
  • ISBN-13: 9781032582696

    • 海外代購書籍(需單獨結帳)

相關主題

商品描述

Induction Machines Handbook: Transients, Control Principles, Design and Testing presents a practical up-to-date treatment of intricate issues with induction machines (IM) required for design and testing in both rather constant- and variable-speed (with power electronics) drives. It contains ready-to-use industrial design and testing knowledge, with numerous case studies to facilitate a thorough assimilation of new knowledge.

Individual Chapters 1 through 14 discuss in detail the following:

  • Three- and multiphase IM transients

  • Single-phase source IM transients

  • Super-high-frequency models and behavior of IM

  • Motor specifications and design principles

  • IM design below 100 kW and constant V1 and f1

  • IM design above 100 kW and constant V1 and f1

  • IM design principles for variable speed

  • Optimization design

  • Single-phase IM design

  • Three-phase IM generators

  • Single-phase IM generators

  • Linear induction motors

  • Testing of three-phase IMs

  • Single-phase IM testing

Fully revised and amply updated to add the new knowledge of the last decade, this third edition includes special sections on

  • Multiphase IM models for transients

  • Doubly fed IMs models for transients

  • Cage-rotor synchronized reluctance motors

  • Cage-rotor PM synchronous motor

  • Transient operation of self-excited induction generator

  • Brushless doubly fed induction motor/generators

  • Doubly fed induction generators with D.C. output

  • Linear induction motor control with end effect

  • Recent trends in IM testing with power electronics

  • Cage-PM rotor line-start IM testing

  • Linear induction motor (LIM) testing

This up-to-date book discusses in detail the transients, control principles, and design and testing of various IMs for line-start and variable-speed applications in various topologies, with numerous case studies. It will be of direct assistance to academia and industry in conceiving, designing, fabricating, and testing IMs (for the future) of various industries, from home appliances, through robotics, e-transport, and renewable energy conversion.

商品描述(中文翻譯)

《感應機手冊：暫態、控制原則、設計與測試》提供了對感應機（IM）設計和測試中所需的複雜問題的實用且最新的處理，適用於相對恆定和變速（使用電力電子）的驅動系統。書中包含了可立即使用的工業設計和測試知識，並有大量案例研究以促進新知識的徹底吸收。

第1至第14章詳細討論了以下內容：
- 三相及多相IM的暫態
- 單相源IM的暫態
- IM的超高頻模型及行為
- 馬達規格及設計原則
- 100 kW以下的IM設計及恆定V1和f1
- 100 kW以上的IM設計及恆定V1和f1
- 變速IM的設計原則
- 優化設計
- 單相IM設計
- 三相IM發電機
- 單相IM發電機
- 線性感應馬達
- 三相IM的測試
- 單相IM的測試

這第三版經過全面修訂和充分更新，以加入過去十年的新知識，並包括以下特別章節：
- 用於暫態的多相IM模型
- 用於暫態的雙饋IM模型
- 笼型轉子同步磁阻馬達
- 笼型轉子永磁同步馬達
- 自激感應發電機的暫態運行
- 無刷雙饋感應馬達/發電機
- 具有直流輸出的雙饋感應發電機
- 考慮端效應的線性感應馬達控制
- 使用電力電子的IM測試的最新趨勢
- 笼型永磁轉子線啟動IM測試
- 線性感應馬達（LIM）測試

這本最新的書籍詳細討論了各種IM在線啟動和變速應用中的暫態、控制原則、設計和測試，並涵蓋了多種拓撲結構，還有大量案例研究。它將直接幫助學術界和工業界在構思、設計、製造和測試各行各業的IM（未來）方面，從家用電器到機器人、電子運輸和可再生能源轉換。

作者簡介

Ion Boldea, IEEE Life Fellow and Professor Emeritus at University Politehnica Timisoara, Romania, has taught, researched, and extensively published papers and books (monographs and textbooks) for more than 45 years related to rotary and linear electric motor/generator variable-speed drives, and maglevs. He was a visiting professor in the US and UK for more than 5 years between 1973 and the present.

He was granted four IEEE Best Paper Awards, has been a member of IEEE IAS, IE MEC, and IDC since 1992, was the guest editor of numerous special sections in IEEE Trans, vol. IE, IA, delivered keynote addresses at several IEEE-sponsored International Conferences, participated in IEEE Conference tutorials, and has been an IEEE IAS distinguished lecturer since 2008 (with lectures in the US, Brazil, South Korea, Denmark, Italy, etc.). He has conducted periodic intensive graduate courses for academia and industry in the US and Denmark for the last 20 years.

He was a general chair of ten biannual IEEE-sponsored OPTIM International Conferences (www.info-optim.ro) and is the founding and current chief editor, since 2000, of the internet-based Journal of Electrical Engineering (www.jee.ro).

As a full member of the Romanian Academy, he received the 2015 IEEE Nikola Tesla Award for his contributions to the development of rotary and linear electric motor/generator drives and maglevs modeling, design, testing, and control in industrial applications.

作者簡介(中文翻譯)

Ion Boldea，IEEE 生命會士及羅馬尼亞蒂米什瓦拉理工大學名譽教授，從事旋轉和線性電動機/發電機變速驅動及磁懸浮技術的教學、研究，並廣泛發表論文和書籍（專著和教科書）超過45年。他在1973年至今的五年期間，曾在美國和英國擔任訪問教授。

他獲得四項IEEE最佳論文獎，自1992年以來一直是IEEE IAS、IE MEC和IDC的成員，曾擔任IEEE Trans, vol. IE, IA的多個特刊的客座編輯，並在幾個IEEE贊助的國際會議上發表主題演講，參加IEEE會議的教學研討會，自2008年以來成為IEEE IAS的傑出講師（在美國、巴西、南韓、丹麥、義大利等地進行演講）。在過去20年中，他在美國和丹麥為學術界和產業開設了定期的密集研究生課程。

他曾擔任十屆雙年IEEE贊助的OPTIM國際會議的總主席（www.info-optim.ro），並自2000年以來擔任基於網路的《電氣工程期刊》（www.jee.ro）的創始及現任主編。

作為羅馬尼亞科學院的正式成員，他因在工業應用中對旋轉和線性電動機/發電機驅動及磁懸浮技術的建模、設計、測試和控制的貢獻，於2015年獲得IEEE尼古拉·特斯拉獎。

類似商品