Laser Powder Bed Fusion of Additive Manufacturing Technology

本書系統性地介紹了粉末床激光熔化技術及其應用，並總結了作者團隊在過去15年中的科學研究、工程開發和數據積累的經驗。內容包括深入的理論分析以及大量在設備調試、工藝開發和材料測試方面的工程經驗。本書以粉末床激光熔化技術為主題，將內容分為15章，作為從事金屬3D列印的研究人員和工程開發人員的技術學習材料。

Di Wang is a professor/doctoral supervisor of South China University of Technology, China, and a visiting scholar of Birmingham University, UK. And he is currently a director/general manager of Laseradd Technology (Guangzhou) Co., Ltd., a member of the National Committee for Standardization of Special Processing Equipment, the executive/co-chairman of the National Forum for Additional Materials Manufacturing for Young Scholars, the secretary-general of the Design Committee of the Branch of Additional Materials Manufacturing of China Mechanical Engineering Society, the vice director of the Guangdong Metal Addition Engineering Technology Center, and the first young member of the Laser Application Branch of China Optical and Electronics Industry Association, Young Editorial Committee of Journal of Materials Engineering and Journal of Aeronautical Materials, High-level Talents of Guangdong Province High-level Special Program, Guangzhou Pearl River Science and Technology Star, Young Reserve Talents of Liwan District. Yongqiang Yang is a professor and a doctoral supervisor of South China University of Technology, China. In 1982, 1987, and 1993, he successively obtained bachelor's, master's, and doctor's degrees in the Department of Mechanical Science, Tianjin University, China. Currently, he is the executive director of China Mechanical Engineering Society Supplementary Manufacturing Branch, the director of Supplementary Manufacturing Design Committee, the vice president of China 3D Printing Technology Alliance, the president of Guangdong Supplementary Manufacturing (3D Printing) Association, the director of Guangdong Metal Supplementary Manufacturing Engineering Research Center, the director of Guangdong 3D Printing Standardization Committee, the director of Guangdong Laser Industry Association, a senior member of American Laser Association (LIA), etc. Yang Liu is an associate professor in Department of Mechanical Engineering, Ningbo University, China. He received his Ph.D. from School of Mechanical and Automotive Engineering, South China University of Technology in 2015. His research interests include laser metal additive manufacturing process, dynamic mechanical properties of the 3D-printed products, crystal plasticity finite element (CPFE) method, etc. Yuchao Bai is an assistant professor/master supervisor in School of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen, Guangdong, China. He received his PhD degree in mechanical engineering from South China University of Technology in 2018. He was a Senior Research Fellow at the Department of Mechanical Engineering, National University of Singapore, Singapore. He has been engaged in the development of additive manufacturing technology for more than 10 years and is the topic editor of the journal Coatings, the author of more than 50 peer-reviewed scientific papers, the Youth Editor of CJME: AMF and Rare Metal Mat. Eng. and was listed inWorld's Top 2% Scientist Ranking by Stanford University in 2022. He has co-authored 2 books and yielded a number of patents, where 52 were successfully patented by China and Japan. His main research interests include metal additive manufacturing and post-processing, ultra-precision machining, and hybrid manufacturing. Chaolin Tan is a Senior Scientist at the Singapore Institute of Manufacturing Technology (SIMTech), A*STAR. He received his PhD degree in materials processing engineering in June 2019. He was awarded as an Honorary Research Fellow of the University of Birmingham and Guangzhou Young Talent Researcher in 2019. He was elected as the Fellow of International Association of Advanced Materials (IAAM) and listed as World's Top 2% Scientist Ranking by Stanford University in 2022. His research experience in Additive Manufacturing (3D printing), has been over 9 years and contributed more than 60 SCI papers, including more than 30SCI journal papers as the lead author. He is on the Editorial Board of Int. J. Mach. Tools Manuf. and Youth Editor of Int. J. Extreme Manuf. and J. Mater. Sci. Technol.

Di Wang 是中國南方科技大學的教授/博士生導師，並且是英國伯明翰大學的訪問學者。目前，他擔任廣州雷射科技有限公司的董事/總經理，並且是國家特種加工設備標準化委員會的成員，青年學者增材製造國家論壇的執行/聯合主席，中國機械工程學會增材製造分會設計委員會的秘書長，廣東金屬增材工程技術中心的副主任，以及中國光電行業協會雷射應用分會的首位青年成員，材料工程學報和航空材料學報的青年編輯委員會成員，廣東省高層次人才高層次特別計畫的高層次人才，廣州珠江科技之星，荔灣區青年儲備人才。

Yongqiang Yang 是中國南方科技大學的教授和博士生導師。他於1982年、1987年和1993年分別在中國天津大學機械科學系獲得學士、碩士和博士學位。目前，他是中國機械工程學會增材製造分會的執行董事，增材製造設計委員會的主任，中國3D打印技術聯盟的副會長，廣東增材製造（3D打印）協會的會長，廣東金屬增材製造工程研究中心的主任，廣東3D打印標準化委員會的主任，廣東雷射行業協會的主任，美國雷射協會（LIA）的高級會員等。

Yang Liu 是中國寧波大學機械工程系的副教授。他於2015年在南方科技大學機械與汽車工程學院獲得博士學位。他的研究興趣包括雷射金屬增材製造過程、3D打印產品的動態機械性能、晶體塑性有限元（CPFE）方法等。

Yuchao Bai 是中國哈爾濱工業大學（深圳）機械工程與自動化學院的助理教授/碩士生導師。他於2018年在南方科技大學獲得機械工程博士學位。他曾是新加坡國立大學機械工程系的高級研究員。他從事增材製造技術的開發已有超過10年，並擔任期刊 Coatings 的主題編輯，發表了超過50篇同行評審的科學論文，是 CJME: AMF 和 Rare Metal Mat. Eng. 的青年編輯，並於2022年被斯坦福大學列入全球前2%科學家排名。他共同編著了2本書籍，並獲得多項專利，其中52項已在中國和日本成功專利化。他的主要研究興趣包括金屬增材製造及後處理、超精密加工和混合製造。

Chaolin Tan 是新加坡製造技術研究所（SIMTech）A*STAR 的高級科學家。他於2019年6月獲得材料加工工程博士學位。2019年，他被授予伯明翰大學榮譽研究員和廣州青年人才研究者的稱號。他被選為國際先進材料協會（IAAM）的院士，並於2022年被斯坦福大學列入全球前2%科學家排名。他在增材製造（3D打印）方面的研究經驗超過9年，發表了超過60篇SCI論文，其中30篇以上為第一作者的SCI期刊論文。他是國際機械工具期刊的編輯委員會成員。