Testing and Modeling of Cellular Materials (細胞材料的測試與建模)
Spear, Derek G., Palazotto, Anthony N.
- 出版商: CRC
- 出版日期: 2024-12-19
- 售價: $2,380
- 貴賓價: 9.5 折 $2,261
- 語言: 英文
- 頁數: 184
- 裝訂: Quality Paper - also called trade paper
- ISBN: 1032290242
- ISBN-13: 9781032290249
尚未上市，無法訂購
相關主題
商品描述
Testing and Modeling of Cellular Materials discusses the characterization of cellular lattices through quasi-static and dynamic testing for use in light-weighting or energy-absorbing applications. Covering cellular materials, specifically additively manufactured lattices, this book further progresses into dynamic testing and modeling techniques for computational simulations. It presents modeling and simulation techniques used for cellular materials and evaluates them against experimental results to illustrate the material response under various conditions. The book also includes a case study of high-velocity impact that highlights the high strain rate effects on the cellular lattices.
Features:
- Covers different testing techniques used in quasi-static and dynamic material characterization of cellular materials
- Discusses additive manufacturing techniques for lattice specimen fabrication
- Analyzes different finite element modeling techniques for quasi-static and dynamic loading conditions
- Presents a comparison and development of a phenomenological material model for use in computational analysis at various loading rates
- Explores impact stress wave analysis under high-velocity loading
The book will be useful for researchers and engineers working in the field of materials modeling and mechanics of materials.
商品描述(中文翻譯)
《細胞材料的測試與建模》討論了通過準靜態和動態測試對細胞格架的特徵進行表徵，以用於輕量化或能量吸收應用。這本書涵蓋了細胞材料，特別是增材製造的格架，並進一步探討了用於計算模擬的動態測試和建模技術。它介紹了用於細胞材料的建模和模擬技術，並將其與實驗結果進行評估，以說明材料在各種條件下的反應。書中還包括了一個高速度衝擊的案例研究，突顯了高應變率對細胞格架的影響。
特色：
- 涵蓋了用於細胞材料的準靜態和動態材料特徵測試的不同技術
- 討論了用於格架樣本製作的增材製造技術
- 分析了不同的有限元素建模技術，以應對準靜態和動態載荷條件
- 提出了用於各種載荷速率的計算分析的現象學材料模型的比較和發展
- 探索了在高速度載荷下的衝擊應力波分析
這本書將對從事材料建模和材料力學領域的研究人員和工程師有所幫助。
作者簡介
Dr. Derek G. Spear completed his MS in Aerospace Engineering at the North Carolina State University in Raleigh, NC, and his MS in Aviation Systems at the University of Tennessee in Knoxville, TN. He obtained his PhD in Aeronautical Engineering from the Air Force Institute of Technology, Wright-Patterson Air Force Base, OH. He has assumed various roles as executive officer/instructor pilot, flight commander/program manager, test pilot, helicopter flight commander, flight safety officer, director of operations, and commander. He has received many awards, honors, and decorations for his services. He has published white papers and presented his research work at international conferences.
Dr. Anthony N. Palazotto is a Distinguished Professor, Aerospace Engineering at the Air Force Institute of Technology. He has over 50 years of experience in administration, research, and education within an Engineering College. He supervised and administered faculty within a departmental division. He developed research efforts and course offerings in composite materials, wave mechanics, elasticity, shells, fracture mechanics, and finite element techniques. He is highly involved in technical society activity as chairperson and founder of various committees. He was the author of over 700 presentations and publications, 271 are archival.
作者簡介(中文翻譯)
Dr. Derek G. Spear 完成了北卡羅來納州立大學（North Carolina State University）航空工程碩士學位，並在田納西大學（University of Tennessee）獲得航空系統碩士學位。他在俄亥俄州的空軍技術學院（Air Force Institute of Technology）獲得航空工程博士學位。他擔任過多種職位，包括執行官/飛行教官、飛行指揮官/計畫經理、試飛員、直升機飛行指揮官、飛行安全官、運營主任及指揮官。他因其服務獲得了許多獎項、榮譽和勳章。他發表了白皮書並在國際會議上展示了他的研究成果。
Dr. Anthony N. Palazotto 是空軍技術學院（Air Force Institute of Technology）航空工程的傑出教授。他在工程學院的行政、研究和教育方面擁有超過50年的經驗。他監督並管理部門內的教職員。他發展了在複合材料、波動力學、彈性、殼體、斷裂力學和有限元素技術等領域的研究工作和課程。他積極參與技術社會活動，擔任各種委員會的主席和創始人。他是超過700篇演講和出版物的作者，其中271篇為檔案性質。
