Handbook of Post-Processing in Additive Manufacturing: Requirements, Theories, and Methods
暫譯: 增材製造後處理手冊：需求、理論與方法

《增材製造後處理手冊》是一本關於增材製造產品可用的後處理技術的重要資源。它廣泛涵蓋了新興技術背後的理論、材料開發、功能特徵以及調查新應用和方法所需的技術細節。

本手冊介紹了針對增材製造零件的創新方法的實驗突破，這些方法適用於要求嚴格的工程應用。該手冊強調了各種後處理技術，這些技術能有效消除增材製造組件的劣勢。它還提供了一系列關鍵原則、文獻、方法論、實驗結果、案例研究以及不同類型後處理技術的理論方面，並涵蓋不同類別的材料和最終應用。

本書是圖書館和研究生課程以及專業市場的理想參考資料，包括但不限於製造、機械與工業工程以及材料科學。

Gurminder Singh is an assistant professor at the mechanical engineering department, Indian Institute of Technology Bombay, India. He worked as a postdoc researcher in the mechanical and materials engineering school at University College Dublin (UCD), Dublin, Ireland. Before joining UCD, Dr Singh was a Postdoc fellow at SIMAP Lab, University of Grenoble Alpes, France. His research focused on the experimental and simulation studies of the extrusion 3D printing of metals. Dr Singh was awarded by Gandhian Young Technological Innovation Award for developing a 3D printing method for fabricating patient-specific stents in 2020. Dr Singh obtained his PhD from the Indian Institute of Technology in Delhi, India. His PhD work focused on developing low-cost rapid manufacturing techniques using ultrasonic vibration-assisted sintering and 3D printing. The 3D Print website featured his PhD work in Feb 2020 edition. He has completed his ME from Thapar University, India. He has worked on comparing modern controllers for the swing-up and stabilization of inverted pendulums and was a team member in the Indo-Swedish project on exoskeletons. He has completed his bachelor's from Guru Nanak Dev Engineering College, Ludhiana, India, in Production Engineering. Dr Singh also has research fellow experience at IIT Delhi and production engineer experience at Shakunt Enterprises, India. He has published over 35 articles in peer-reviewed international journals, conference proceedings and book chapters. He has published in leading journals such as Additive Manufacturing, Materials Science and Engineering: A, Journal of Manufacturing Processes, Rapid Prototyping, etc.

Ranvijay Kumar is an assistant professor at University Centre for Research and Development,
Chandigarh University. He has received PhD in Mechanical Engineering from Punjabi University, Patiala.
Additive manufacturing, shape memory polymers, smart materials, friction-based welding techniques,
advance materials processing, polymer matrix composite preparations, and reinforced polymer composites for
3D printing, plastic solid waste management, thermosetting recycling and destructive testing of materials
are the skills of Dr Kumar. Dr Kumar won the prestigious CII MILCA award in 2020. He has co-authored
more than 43 research papers in science citation indexed journals, 38 book chapters and have presented
Twenty research papers in various national/international level conferences. He has contributed extensively in
Additive Manufacturing literature with publications appearing in the Journal of Manufacturing Processes,
Composite Part: B, Rapid Prototyping Journal, Journal of Thermoplastic Composite Materials,
Measurement, Proceedings of the Institution of Mechanical Engineers, Part C (iMeche Part C),
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,
Journal of Thermoplastic Composite Materials, Materials Research Express, Proceedings of the National
Academy of Sciences, India Section A: Physical Sciences, Journal of Central South University, Journal of
the Brazilian Society of Mechanical Sciences and Engineering, Composite structures, CIRP Journal of
Manufacturing Science and Technology etc. He is the editor of the book "Additive Manufacturing for Plastic
Recycling: Efforts in Boosting A Circular Economy" published in CRC Press (Taylor and Francis)".

Kamalpreet Sandhu is an Assistant Professor in the Product and Industrial Design department at Lovely
Professional University, Phagwara, Punjab, INDIA. His primary focus is on designing and developing
footwear products and injury prevention. He was done different projects in Podiatric Medicine at the
Defence Institute of Physiology and Allied Sciences, DRDO, Delhi, i.e., Design and developed a new kind
of orthosis for social needs and work resulted in the publication "Effect of Shod Walking on Plantar
Pressure with Varying Insole". His area of research is Design Thinking, 3D printing and Ergonomics for
Podiatric Medicine. He is also the editor of various books: Sustainability for 3D Printing, Revolutions in
Product Design for Healthcare, Food Printing: 3D printing in Food Sector and 3D printing in the Podiatric
Medicine. He is also acting as an Editorial Review board member for the International Journal of
Technology and Human Interaction (IJTHI), Advances in Science, Technology and Engineering Systems
Journal (ASTESJ) and also a review editor for Frontiers in Manufacturing Technology section "Additive
Processes". He has established a research collaboration with Prof. Karupppasamy Subburaj in Singapore
University of Technology and Design (SUTD), SINGAPORE, on Medical Device Design and
Biomechanics.

Dr. Eujin Pei is a Reader in Additive Manufacturing at Brunel University London. He is the Associate Dean for the College of Engineering, Design and Physical Sciences and Director for the BSc Product Design Engineering programme. Eujin is a Fellow and Council Member of the Institution of Engineering Designers (FIED), a Chartered Engineer (CEng), a Chartered Environmentalist (CEnv) and a Chartered Technological Product Designer (CTPD). His research focuses on Design for Additive Manufacturing, and he chairs national (BSI AMT/8) and international standardisation committees (ISO TC261/WG4). Eujin is also the Editor-in-Chief of the Progress in Additive Manufacturing Journal, published by Springer Nature.

Dr. Sunpreet Singh works in Additive Manufacturing, Composites, Biomaterials, Process Control, and Sustainability. He is an adjunct professor and visiting researcher associated with Chandigarh University, India and the National University of Singapore, Singapore. He has published about 250 research articles in prominent journals. He has received PhD in Mechanical Engineering from Guru Nanak Dev Engineering College, Ludhiana, India. His area of research is Additive Manufacturing and the application of 3D printing to develop new biomaterials for clinical applications. He has contributed extensively to Additive Manufacturing literature with publications appearing in the Journal of Manufacturing Processes, Composite Part: B, Rapid Prototyping Journal, Journal of Mechanical Science and Technology, Measurement, International Journal of Advance Manufacturing Technology, and Journal of Cleaner Production. He authored 250 research papers and 27 book chapters. He is also the Guest Editor of 3 Journals: Guest Editor of a Special Issue of "Functional Materials and Advanced Manufacturing", Facta Universitatis, Series: Mechanical Engineering (Scopus Index), Materials Science Forum (Scopus Index), and Special Issue on "Metrology in Materials and Advanced Manufacturing", Measurement and Control (SCI indexed).

**Gurminder Singh** 是印度孟買印度理工學院機械工程系的助理教授。他曾在愛爾蘭都柏林大學（University College Dublin, UCD）機械與材料工程學院擔任博士後研究員。在加入UCD之前，Singh博士曾是法國格勒諾布爾阿爾卑斯大學SIMAP實驗室的博士後研究員。他的研究專注於金屬的擠出3D列印的實驗和模擬研究。Singh博士因於2020年開發了一種製造病人特定支架的3D列印方法而獲得甘地青年技術創新獎。他在印度德里印度理工學院獲得博士學位，博士研究工作專注於使用超聲波振動輔助燒結和3D列印開發低成本快速製造技術。他的博士研究工作在2020年2月的3D Print網站上被特別報導。他在印度Thapar大學獲得碩士學位。他曾研究比較現代控制器在倒立擺的擺動和穩定化方面的應用，並且是印瑞合作的外骨骼項目的團隊成員。他在印度盧迪亞納的Guru Nanak Dev工程學院獲得學士學位，主修生產工程。Singh博士還在德里印度理工學院擔任研究員，並在印度Shakunt Enterprises擔任生產工程師。他在同行評審的國際期刊、會議論文集和書籍章節上發表了超過35篇文章，並在《Additive Manufacturing》、《Materials Science and Engineering: A》、《Journal of Manufacturing Processes》、《Rapid Prototyping》等領先期刊上發表過文章。

**Ranvijay Kumar** 是昌迪加爾大學研究與發展中心的助理教授。他在旁遮普大學（Punjabi University, Patiala）獲得機械工程博士學位。Kumar博士的專業技能包括增材製造、形狀記憶聚合物、智能材料、基於摩擦的焊接技術、高級材料加工、聚合物基複合材料的製備，以及用於3D列印的增強聚合物複合材料、塑料固體廢物管理、熱固性回收和材料的破壞性測試。Kumar博士在2020年獲得了著名的CII MILCA獎。他共同撰寫了超過43篇科學引文索引期刊的研究論文、38章書籍章節，並在各種國內/國際會議上發表了20篇研究論文。他在增材製造文獻中做出了廣泛貢獻，發表的期刊包括《Journal of Manufacturing Processes》、《Composite Part: B》、《Rapid Prototyping Journal》、《Journal of Thermoplastic Composite Materials》、《Measurement》、《Proceedings of the Institution of Mechanical Engineers, Part C (iMeche Part C)》、《Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine》、《Journal of Thermoplastic Composite Materials》、《Materials Research Express》、《Proceedings of the National Academy of Sciences, India Section A: Physical Sciences》、《Journal of Central South University》、《Journal of the Brazilian Society of Mechanical Sciences and Engineering》、《Composite structures》、《CIRP Journal of Manufacturing Science and Technology》等。他是由CRC Press（Taylor and Francis）出版的書籍《Additive Manufacturing for Plastic Recycling: Efforts in Boosting A Circular Economy》的編輯。

**Kamalpreet Sandhu** 是印度旁遮普州Phagwara的Lovely Professional University產品與工業設計系的助理教授。他的主要研究重點是設計和開發鞋類產品及傷害預防。他曾在印度德防部生理學與相關科學研究所進行足病醫學的不同項目，例如設計和開發一種新型社會需求矯形器，並發表了《Effect of Shod Walking on Plantar Pressure with Varying Insole》。他的研究領域包括設計思維、3D列印和足病醫學的人體工學。他還編輯了多本書籍，包括《Sustainability for 3D Printing》、《Revolutions in Product Design for Healthcare》、《Food Printing: 3D printing in Food Sector》和《3D printing in the Podiatric Medicine》。他還擔任《International Journal of Technology and Human Interaction (IJTHI)》、《Advances in Science, Technology and Engineering Systems Journal (ASTESJ)》的編輯審查委員會成員，並擔任《Frontiers in Manufacturing Technology》部分的審查編輯，專注於“增材製程”。他與新加坡科技設計大學（SUTD）的Karupppasamy Subburaj教授建立了醫療設備設計和生物力學的研究合作。

**Dr. Eujin Pei** 是倫敦布魯內爾大學的增材製造講師。他是工程、設計與物理科學學院的副院長，以及BSc產品設計工程課程的主任。Eujin是工程設計學會的院士及理事（FIED），也是特許工程師（CEng）、特許環保專家（CEnv）和特許技術產品設計師（CTPD）。他的研究專注於增材製造的設計，他擔任國家（BSI AMT/8）和國際標準化委員會（ISO TC261/WG4）的主席。Eujin還是由Springer Nature出版的《Progress in Additive Manufacturing Journal》的主編。

**Dr. Sunpreet Singh** 專注於增材製造、複合材料、生物材料、過程控制和可持續性。他是與印度昌迪加爾大學和新加坡國立大學相關的兼任教授和訪問研究員。他在知名期刊上發表了約250篇研究文章。他在印度盧迪亞納的Guru Nanak Dev工程學院獲得機械工程博士學位。他的研究領域是增材製造及其在臨床應用中開發新生物材料的應用。他在增材製造文獻中做出了廣泛貢獻，發表的期刊包括《Journal of Manufacturing Processes》、《Composite Part: B》、《Rapid Prototyping Journal》、《Journal of Mechanical Science and Technology》、《Measurement》、《International Journal of Advance Manufacturing Technology》和《Journal of Cleaner Production》。他撰寫了250篇研究論文和27章書籍章節。他還是三本期刊的客座編輯：特刊《Functional Materials and Advanced Manufacturing》的客座編輯，Facta Universitatis, Series: Mechanical Engineering（Scopus Index）、Materials Science Forum（Scopus Index），以及特刊《Metrology in Materials and Advanced Manufacturing》的客座編輯，Measurement and Control（SCI索引）。