Rapid System Prototyping with FPGAs: Accelerating the Design Process (Paperback)
暫譯: 使用FPGA快速系統原型設計:加速設計流程

R. C. Cofer, Benjamin F. Harding

  • 出版商: Newnes
  • 出版日期: 2005-09-01
  • 售價: $969
  • 語言: 英文
  • 頁數: 320
  • 裝訂: Paperback
  • ISBN: 0750678666
  • ISBN-13: 9780750678667
  • 相關分類: FPGA
  • 無法訂購

買這商品的人也買了...

商品描述

Description:

The push to move products to market as quickly and cheaply as possible is fiercer than ever, and accordingly, engineers are always looking for new ways to provide their companies with the edge over the competition. Field-Programmable Gate Arrays (FPGAs), which are faster, denser, and more cost-effective than traditional programmable logic devices (PLDs), are quickly becoming one of the most widespread tools that embedded engineers can utilize in order to gain that needed edge. FPGAs are especially popular for prototyping designs, due to their superior speed and efficiency.

This book hones in on that rapid prototyping aspect of FPGA use, showing designers exactly how they can cut time off production cycles and save their companies money drained by costly mistakes, via prototyping designs with FPGAs first. Reading it will take a designer with a basic knowledge of implementing FPGAs to the “next-level” of FPGA use because unlike broad beginner books on FPGAs, this book presents the required design skills in a focused, practical, example-oriented manner.

 

Table of Contents:

Chapter 1: Introduction; Chapter 2: FPGA Fundamentals; Chapter 3: Optimizing the Development Cycle; Chapter 4: System Engineering; Chapter 5:FPGA Device Level Design Decisions; Chapter 6: Board-Level Design Decisions and Allocation; Chapter 7: Design Implementation; Chapter 8: Design Simulation; Chapter 9: Design Constraints and Optimization; Chapter 10: Configuration; Chapter 11: Board-Level Testing; Chapter 12: Advanced Topics Introduction; Chapter 13:Cores and Intellectual Property; Chapter 14: Embedded Processing Cores; Chapter 15: Digital Signal Processing; Chapter 16: Advanced Interconnects; Chapter 17: Bringing it All Together; Appendices; Abbreviations and Acronyms; Index

商品描述(中文翻譯)

描述:

將產品以最快和最便宜的方式推向市場的壓力比以往任何時候都要強烈,因此工程師們總是在尋找新的方法,以便為他們的公司提供競爭優勢。現場可編程閘陣列(Field-Programmable Gate Arrays, FPGAs)比傳統的可編程邏輯設備(Programmable Logic Devices, PLDs)更快、更密集且更具成本效益,迅速成為嵌入式工程師可以利用的最廣泛工具之一,以獲得所需的優勢。由於其卓越的速度和效率,FPGAs 在設計原型方面特別受歡迎。

本書專注於 FPGA 使用的快速原型製作方面,向設計師展示如何通過先使用 FPGAs 進行設計原型來縮短生產週期並節省因昂貴錯誤而耗費的公司資金。閱讀本書將使具備基本 FPGA 實施知識的設計師提升到 FPGA 使用的「下一個層次」,因為與廣泛的初學者 FPGA 書籍不同,本書以專注、實用和示例導向的方式呈現所需的設計技能。

目錄:

第 1 章:介紹;第 2 章:FPGA 基礎;第 3 章:優化開發週期;第 4 章:系統工程;第 5 章:FPGA 設備級設計決策;第 6 章:板級設計決策與分配;第 7 章:設計實施;第 8 章:設計模擬;第 9 章:設計約束與優化;第 10 章:配置;第 11 章:板級測試;第 12 章:進階主題介紹;第 13 章:核心與智慧財產;第 14 章:嵌入式處理核心;第 15 章:數位信號處理;第 16 章:進階互連;第 17 章:整合所有內容;附錄;縮寫與首字母縮略詞;索引