WCDMA Deployment Handbook: Planning and Optimization Aspects
暫譯: WCDMA 部署手冊：規劃與優化面向

Description

A complete and practical guide to WCDMA/UMTS cellular network deployment.

After introducing the network architecture of such a system, the WCDMA (UMTS) Deployment Handbook defines the coverage and capacity concepts associated with the dimensioning and design phases. Progressing to a discussion of the main system parameters associated with network optimization and detailing optimization techniques for the main services supported by UMTS, and includes the specifics of indoor deployment and HSDPA networks evolution.

• Covers all stages from planning to optimization with sufficient details as required on a day-to-day basis, and thorough reference information for the reader who wants to understand the concepts in more detail
• Relevant for daily tasks: The approach taken in this book is similar to the work flow of network planner and optimization engineers, allowing such personnel to easily find the relevant information
• Written by the company which made CDMA a household name: QUALCOMM was the first company to use CDMA technology for cellular application and is a technical leader in this domain
• Based on industry feedback: All the contributors to this book have been working in direct interaction with WCDMA operators, throughout the world, since the early days of WCDMA commercial deployment
• Looking to the future: This book addresses the next level of challenge that WCDMA operators will face - deployment of indoor systems and HSDPA

Providing a complete introduction and reference guide to everything associated with the life cycle of a WCDMA/UMTS cellular network, from initial dimensioning through to the successful deployment of indoor solutions, or migration to HSDPA, this book is a must-have for network planners and optimization engineers as well as Telecommunication Engineering students.

 

Table of Contents

List of contributors.

Foreword.

Preface.

Acronyms.

Acknowledgement.

1. INTRODUCTION TO UMTS NETWORKS (Patrick Chan, Andrea Garavaglia, Christophe Chevallier).

1.1 UMTS NETWORK TOPOLOGY.

1.1.1 GSM Network Architecture.

1.1.2 UMTS Overlay, Release 99.

1.1.3 UMTS Network Architecture beyond Release 99.

1.2 WCDMA CONCEPTS.

1.2.1 WCDMA Physical Layer Procedures.

1.2.2 UMTS Signaling Concepts.

1.2.3 Physical, Logical, and Transport Channels.

1.3 WCDMA NETWORK DEPLOYMENT OPTIONS.

1.4 THE EFFECTS OF VENDOR IMPLEMENTATION.

2. RF PLANNING AND OPTIMIZATION (Christophe Chevallier).

2.1 INTRODUCTION.

2.2 OVERVIEW OF THE NETWORK DEPLOYMENT PROCESS.

2.2.1 Network Planning.

2.2.2 Initial Optimization.

2.2.3 Continuous Optimization.

2.3 LINK BUDGETS.

2.3.1 Uplink Link Budgets.

2.3.2 Downlink Link Budget for CPICH.

2.3.3 Downlink Link Budget for Various Services (Connected Mode).

2.3.4 Uplink and Downlink and Service Comparison.

2.4 NETWORK PLANNING TOOLS.

2.4.1 Network Planning Tool Input.

2.4.2 Coverage Considerations during Network Planning.

2.5 INTERFERENCE CONSIDERATIONS DURING NETWORK PLANNING.

2.6 TOPOLOGY PLANNING.

2.7 PARAMETER SETTINGS AND OPTIMIZATION DURING NETWORK PLANNING.

2.8 RF OPTIMIZATION.

2.8.1 Quantitative Optimization.

2.8.2 Qualitative Optimization.

2.8.3 Idle Mode Optimization.

3. CAPACITY PLANNING AND OPTIMIZATION (Christophe Chevallier).

3.1 BASIC UMTS TRAFFIC ENGINEERING.

3.1.1 Capacity Requirements.

3.1.2 Uplink Capacity Estimation.

3.1.3 Estimating Downlink Capacity.

3.2 EFFECT OF VIDEO-TELEPHONY AND PS DATA ON TRAFFIC ENGINEERING.

3.2.1 WCDMA Traffic Engineering and Video-Telephony.

3.2.2 WCDMA Traffic Engineering and PS Data.

3.3 MULTI-SERVICE TRAFFIC ENGINEERING.

3.3.1 Multi-Service Capacity.

3.3.2 Uplink and Downlink Capacity Comparison.

3.4 CAPACITY PLANNING.

3.4.1 Input for Capacity Planning.

3.4.2 Capacity Planning for the CS Domain.

3.4.3 Capacity Planning for the PS Domain.

3.4.4 Capacity Planning with a Network Planning Tool.

3.4.5 Microcell Issues.

3.5 OPTIMIZING FOR CAPACITY.

3.5.1 Coverage and Capacity Tradeoffs.

3.5.2 Capacity Estimation in a Deployed Network.

3.5.3 Capacity Monitoring for a Deployed Network.

4. INITIAL PARAMETER SETTINGS (Christopher Brunner, Andrea Garavaglia, Christophe Chevallier).

4.1 Introduction.

4.1.1 Broadcast of System Information.

4.1.2 Translation between Information Element Values and Engineering Values.

4.1.3 Over-the-Air Parameter Verification.

4.2 Physical Layer Parameters.

4.2.1 Frequency Selection and Management.

4.2.2 PSC Planning.

4.2.3 Power Allocation.

4.3 Intra-Frequency Cell Reselection Parameters.

4.3.1 Introduction.

4.3.2 Overview of the Intra-Frequency Cell Reselection Procedure.

4.3.3 List of Intra-Frequency Cell Reselection Parameters.

4.3.4 Intra-Frequency Cell Reselection Metrics.

4.3.5 Intra-Frequency Cell Reselection Trade-offs in Idle Mode.

4.3.6 Intra-Frequency Cell Reselection Parameter Recommendations for Idle Mode.

4.3.7 Intra-Frequency Cell Reselection in CELL_FACH State.

4.3.8 Inter-Frequency Cell Reselection Considerations.

4.4 Access Parameter Recommendations.

4.5 Intra-Frequency Handover Parameters.

4.5.1 Introduction.

4.5.2 Intra-Frequency Handover Procedure.

4.5.3 Intra-Frequency Handover Parameters.

4.5.4 Intra-Frequency Handover Metrics.

4.5.5 Intra-Frequency Handover Trade-offs.

4.5.6 Intra-Frequency Handover Parameter Recommendations.

4.5.7 Inter-Frequency Handover Considerations.

5. SERVICE OPTIMIZATION (Andrea Forte, Patrick Chan, Christophe Chevallier).

5.1 KPI AND LAYERED OPTIMIZATION APPROACH.

5.1.1 Main KPI Definitions.

5.2 VOICE SERVICE OPTIMIZATION.

5.2.1 Adaptive Multi-Rate (AMR) Codec.

5.2.2 AMR Service.

5.2.3 Call Setup, Events, and Signaling.

5.2.4 Call Retention Event and Signaling.

5.2.5 Connection Supervision and Link Quality Indicators.

5.2.6 Troubleshooting AMR Failures.

5.2.7 Parameter Optimization.

5.2.8 Call Quality Metrics and Test Process.

5.3 VIDEO TELEPHONY SERVICE OPTIMIZATION.

5.3.1 Video Telephony and Voice Comparison.

5.3.2 Video Telephony Test Process and Metrics.

5.3.3 VT versus AMR Optimization.

5.4 PS DATA SERVICE OPTIMIZATION.

5.4.1 PS Data versus AMR Optimization.

5.4.2 Typical PS Data Applications and QoS Profiles.

5.4.3 Channel Reconfiguration and Resource Planning.

5.4.4 Quality Metrics and Test Process.

5.4.5 PS Data Parameters.

6. INTER-SYSTEM PLANNING AND OPTIMIZATION (Andrea Garavaglia, Christopher Brunner, Christophe Chevallier).

6.1 INTRODUCTION.

6.2 INTER-SYSTEM BOUNDARY PLANNING.

6.2.1 Inter-System Borders.

6.2.2 Typical Inter-System Scenarios.

6.2.3 Boundary Determination.

6.3 INTER-SYSTEM TRANSITIONS IN CONNECTED MODE.

6.3.1 Inter-System Change Procedures.

6.3.2 Message Flows and Delays.

6.3.3 Compressed Mode Issues.

6.3.4 Compressed Mode Performance Metrics.

6.3.5 Compressed Mode Triggering and Inter-System Handover Parameters.

6.4 INTER-SYSTEM TRANSITIONS IN IDLE MODE.

6.4.1 Overview of the Inter-System Cell Reselection Procedure.

6.4.2 Message Flow and Delays.

6.4.3 Idle Mode Performance Metrics.

6.4.4 Inter-System Cell Reselection Parameters.

6.5 TEST SETUP FOR INTER-SYSTEM HANDOVER AND CELL RESELECTION PERFORMANCE ASSESSMENT.

6.6 OPTIMIZING INTER-SYSTEM PARAMETERS.

6.6.1 Interplay between Inter-System Handover and Cell Reselection Parameters.

6.6.2 Optimizing Inter-System Handover Parameters.

6.6.3 Optimizing Inter-System Cell Reselection Parameters.

6.7 ADDITIONAL INTER-SYSTEM PLANNING AND OPTIMIZATION ISSUES.

6.7.1 Inter-System Handover When More WCDMA Carriers are Present.

6.7.2 Inter-System Triggered for Capacity Reasons.

7. HSDPA (Kevin Murray, Sunil Patil).

7.1 MOTIVATIONS FOR HSDPA.

7.2 HSDPA CONCEPTS.

7.2.1 Common Channel with Multi-code Operation.

7.2.2 Adaptive Modulation and Coding.

7.2.3 Fast Scheduling and Retransmissions.

7.3 HSDPA PLANNING.

7.3.1 HSDPA Deployment Scenarios.

7.3.2 HSDPA Link Budget.

7.3.3 HSDPA Capacity and Performance.

7.4 HSDPA OPERATION AND OPTIMIZATION.

7.4.1 HSDPA Configuration.

7.4.2 HSDPA Serving Cell Change.

7.4.3 HSDPA Parameter Tuning.

7.4.4 RLC Parameters and HSDPA.

7.5 HSDPA KEY PERFORMANCE INDICATORS (KPI).

7.5.1 Physical Layer Metrics.

7.5.2 MAC Layer Metrics.

7.5.3 Serving Cell Change Metrics.

7.6 TEST SETUP.

8. INDOOR COVERAGE (Patrick Chan, Ken Baker, Christophe Chevallier).

8.1 INTRODUCTION.

8.2 DESIGN APPROACH AND ECONOMIC CONSIDERATIONS.

8.2.1 Indoor Coverage: The Traditional Approach.

8.2.2 Indoor Coverage: A Hypothetical Approach.

8.2.3 Indoor Coverage: The Hybrid Approach.

8.3 COVERAGE PLANNING AND IMPACT ON CAPACITY.

8.3.1 Indoor Coverage Systems.

8.3.2 Service Indoors from the Outdoors.

8.3.3 Service Indoors from the Indoors.

8.3.4 Indoor RF Models.

8.3.5 Capacity Dimensioning.

8.3.6 Achieving Higher Throughput Indoors.

8.4 OPTIMIZING INDOOR SYSTEMS.

8.4.1 Practical Considerations for Indoor Deployments.

8.4.2 Indoor System Deployment and Post-Deployment Optimization.

8.4.3 How Indoor Parameter Settings Differ from Outdoor Systems.

Index.