Active, Hybrid, and Semi-active Structural Control: A Design and Implementation Handbook
暫譯: 主動、混合及半主動結構控制:設計與實施手冊
S. Y. Chu, T. T. Soong, A. M. Reinhorn
- 出版商: Wiley
- 出版日期: 2005-08-05
- 售價: $5,210
- 貴賓價: 9.5 折 $4,950
- 語言: 英文
- 頁數: 294
- 裝訂: Hardcover
- ISBN: 0470013524
- ISBN-13: 9780470013526
海外代購書籍(需單獨結帳)
相關主題
商品描述
Description:
- Emphasises fail-safe techniques and validates their implementation through simulations.
- Examines the implicit issues between theoretical development and actual implementation of systems.
- Identifies important hardware and software safety features.
- Describes a PC-based system simulator, which simulates the real-time response of structure and control hardware.
Active, Hybrid and Semi-active Structural Control is a must have reference for researchers, practitioners and design engineers working in civil, aerospace, automotive and mechanical engineering. It is undoubtedly the key resource for all postgraduate students in this rapidly growing area of research interest and development.
Table of Contents:
Preface.
1 Introduction.
1.1 General.
1.2 Basic Principles.
1.3 State-of-the-Practice.
1.4 Implementation-Related Issues.
1.5 Organization.
2 Hardware Description.
2.1 Introduction.
2.2 Active Control Force Generation System.
2.3 Measuring Equipment.
2.4 Signal Interface System.
2.5 Digital Control System.
2.6 Case Study.
3 Control Software Implementation.
3.1 Introduction.
3.2 Practical Considerations.
3.3 Digital Control System (Software).
3.4 Appropriate Design Morphology.
3.5 Case Study.
4 Theoretical and Practical Control Techniques.
4.1 General.
4.2 Continuous-Time Optimal Direct Output Feedback.
4.3 Effect of Time Delay.
4.4 Discrete-Time Control Analysis and Design.
4.5 Analytical Simulations of Discrete-Time Control.
4.6 Case Study.
5 Control Performance Verification.
5.1 Introduction.
5.2 Real-Time Structural Simulator.
5.3 Real-Time Control Verification of the Hybrid/Active Mass Damper Model.
5.4 Case Study.
6 Summary.
6.1 Directions of Future Development.
References.
Author Index.
Subject Index.
商品描述(中文翻譯)
**描述:**
這本綜合手冊旨在提供讀者成功實施主動、混合或半主動控制系統所需的知識,以保護結構免受風或地震等環境力量的影響。由結構控制領域的領先專家撰寫,本書:
- 強調安全失效技術,並通過模擬驗證其實施。
- 檢視理論發展與系統實際實施之間的隱含問題。
- 確定重要的硬體和軟體安全特性。
- 描述一個基於PC的系統模擬器,模擬結構和控制硬體的實時反應。
《主動、混合和半主動結構控制》是土木、航空、汽車和機械工程領域的研究人員、實務工作者和設計工程師必備的參考資料。毫無疑問,它是所有在這個快速增長的研究興趣和發展領域中的研究生的關鍵資源。
**目錄:**
**前言。**
**1 引言。**
1.1 一般。
1.2 基本原則。
1.3 實務現狀。
1.4 實施相關問題。
1.5 組織。
**2 硬體描述。**
2.1 引言。
2.2 主動控制力生成系統。
2.3 測量設備。
2.4 信號介面系統。
2.5 數位控制系統。
2.6 案例研究。
**3 控制軟體實施。**
3.1 引言。
3.2 實務考量。
3.3 數位控制系統(軟體)。
3.4 適當的設計形態。
3.5 案例研究。
**4 理論與實務控制技術。**
4.1 一般。
4.2 連續時間最佳直接輸出反饋。
4.3 時間延遲的影響。
4.4 離散時間控制分析與設計。
4.5 離散時間控制的分析模擬。
4.6 案例研究。
**5 控制性能驗證。**
5.1 引言。
5.2 實時結構模擬器。
5.3 混合/主動質量阻尼器模型的實時控制驗證。
5.4 案例研究。
**6 總結。**
6.1 未來發展方向。
**參考文獻。**
**作者索引。**
**主題索引。**