RF System Design of Transceivers for Wireless Communications (Hardcover)
暫譯: 無線通信收發器的射頻系統設計 (精裝版)

Qizheng Gu

RF System Design of Transceivers for Wireless Communications (Hardcover)

買這商品的人也買了...

相關主題

商品描述

Description

This book is for RF Engineers and, in particular, those engineers focusing mostly on RF systems and RFIC design. The author develops systematic methods for RF systems design, complete with a comprehensive set of design formulas. Its focus on mobile station transmitter and receiver system design also applies to transceiver design of other wireless systems such as WLAN. This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems.

 

Table of contents

1. Introduction. 1.1. Wireless Systems. 1.2. System Design Convergence. 1.3. Organization of This Book. -2. Fundamentals of System Design. 2.1. Linear Systems and Transformations. 2.2. Nonlinear System Representation and Analysis Approaches. 2.3. Noise and Random Process. 2.4. Elements of Digital Base-Band System. -3. Radio Architectures and Design Considerations. 3.1. Superheterodyne Architecture. 3.2. Direct Conversion (Zero IF) Architecture. 3.3. Low IF Architecture. 3.4. Band-Pass Sampling Radio Architecture. Appendix 3A. Intermodulation Distortion Formulas. Appendix 3B. Effective Interference Evaluation of Second Order Distortion Products. Appendix 3C. I and Q Imbalance and Image Rejection Formula. Appendix 3D. Estimation of ADC Equivalent Noise Figure.-4. Receiver System Analysis and Design. 4.1. Introduction. 4.2. Sensitivity and Noise Figure of Receiver. 4.3. Intermodulation Characteristics. 4.4. Single Tone Desensitization. 4.5. Adjacent/Alternate Channel Selectivity and Blocking Characteristics. 4.6. Receiver Dynamic Range and AGC System. 4.7. System Design and Performance Evaluation. Appendix 4A. Conversion Between Power dBm and Electric Field Strength dBuV/m. Appendix 4B. Proof of Relationship (4.4.6) Appendix 4C. A Comparison of Wireless Mobile Station Minimum Performance Requirements. Appendix 4D. An Example of Receiver Performance Evaluation by Means of Matlab.-5. Transmitter System Analysis and Design. 5.1. Introduction. 5.2. Transmission Power and Spectrum. 5.3. Modulation Accuracy. 5.4. Adjacent and Alternate Channel Power. 5.5. Noise Emission Calculation. 5.6. Some Important Considerations in System Design. Appendix 5A. Approximate Relationship between p and EVM. Appendix 5B. Image Suppression of Transmission Signal. Appendix 5C. Amplifier Nonlinear Simulation: ACPR Calculation. -6. Applications of System Design. 6.1. Multimode and Multiband Superheterodyne Transceiver. 6.2. Direct Conversion Transceiver.

商品描述(中文翻譯)

**書籍描述**

本書適合射頻工程師，特別是專注於射頻系統和射頻集成電路（RFIC）設計的工程師。作者開發了系統化的射頻系統設計方法，並提供了一整套完整的設計公式。其對於行動台站發射器和接收器系統設計的重點，也適用於其他無線系統（如WLAN）的收發器設計。本書是一部全面的參考著作，涵蓋了從通訊理論的一般原則（應用於數位無線電設計）到實現多模式行動系統的具體範例等廣泛主題。

**目錄**

1. 介紹
1.1. 無線系統
1.2. 系統設計的融合
1.3. 本書的組織
2. 系統設計的基本原則
2.1. 線性系統與轉換
2.2. 非線性系統表示法與分析方法
2.3. 噪聲與隨機過程
2.4. 數位基帶系統的要素
3. 無線電架構與設計考量
3.1. 超外差架構
3.2. 直接轉換（零中頻）架構
3.3. 低中頻架構
3.4. 帶通取樣無線電架構
附錄3A. 互調失真公式
附錄3B. 二次失真產物的有效干擾評估
附錄3C. I和Q不平衡及影像抑制公式
附錄3D. ADC等效噪聲指數的估算
4. 接收系統分析與設計
4.1. 介紹
4.2. 接收器的靈敏度與噪聲指數
4.3. 互調特性
4.4. 單音去敏感化
4.5. 相鄰/交替通道選擇性與阻塞特性
4.6. 接收器動態範圍與自動增益控制系統
4.7. 系統設計與性能評估
附錄4A. 功率dBm與電場強度dBuV/m之間的轉換
附錄4B. 關係（4.4.6）的證明
附錄4C. 無線行動台站最低性能要求的比較
附錄4D. 透過Matlab進行接收器性能評估的範例
5. 發射器系統分析與設計
5.1. 介紹
5.2. 傳輸功率與頻譜
5.3. 調變精度
5.4. 相鄰與交替通道功率
5.5. 噪聲排放計算
5.6. 系統設計中的一些重要考量
附錄5A. p與EVM之間的近似關係
附錄5B. 傳輸信號的影像抑制
附錄5C. 放大器非線性模擬：ACPR計算
6. 系統設計的應用
6.1. 多模式與多頻帶超外差收發器
6.2. 直接轉換收發器

類似商品