Printed Antennas: Theory and Design
暫譯: 印刷天線：理論與設計

Kanaujia, Binod Kumar, Kumar Gupta, Surendra, Kishor, Jugul

Printed Antennas: Theory and Design
  • 出版商: CRC
  • 出版日期: 2020-11-23
  • 售價: $6,840
  • 貴賓價: 9.5 折 $6,498
  • 語言: 英文
  • 頁數: 462
  • 裝訂: Hardcover - also called cloth, retail trade, or trade
  • ISBN: 0367420414
  • ISBN-13: 9780367420413
  • 相關分類: 天線相關 Antennas

    • 海外代購書籍(需單獨結帳)

相關主題

商品描述

Printed antennas have become an integral part of next-generation wireless communications and have been found to be commonly used to improve system capacity, data rate, reliability, etc. This book covers theory, design techniques, and the chronological regression of the printed antennas for various applications. This book will provide readers with the basic conceptual knowledge about antennas along with advanced techniques for antenna design. It covers a variety of analytical techniques and their CAD applications and discusses new applications of printed antenna technology such as sensing. The authors also present special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS. The book will be useful to students as an introduction to design and applications of antennas. Additionally, experienced researchers in this field will find this book a ready reference and benefit from the techniques of research in printed antennas included in this book. Following are some of the salient features of this book:

  • Covers a variety of analytical techniques and their CAD applications

  • Discusses new applications of printed antenna technology such as sensing

  • Examines the state of design techniques of printed antenna

  • Presents special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS

商品描述(中文翻譯)

印刷天線已成為下一代無線通信的重要組成部分，並被廣泛用於提高系統容量、數據速率、可靠性等。本書涵蓋了印刷天線的理論、設計技術以及在各種應用中的時間回顧。本書將為讀者提供有關天線的基本概念知識，以及天線設計的進階技術。內容包括多種分析技術及其CAD應用，並討論印刷天線技術的新應用，如感測技術。作者還介紹了特殊的可重構天線，如ME偶極子、極化、供電和DGS。本書將對學生作為天線設計和應用的入門書籍非常有用。此外，該領域的經驗豐富的研究人員也會發現本書是一本隨手可用的參考資料，並能從書中包含的印刷天線研究技術中受益。以下是本書的一些顯著特點：

- 涵蓋多種分析技術及其CAD應用
- 討論印刷天線技術的新應用，如感測技術
- 檢視印刷天線的設計技術現狀
- 介紹特殊的可重構天線，如ME偶極子、極化、供電和DGS

作者簡介

Dr. Binod Kumar Kanaujia has been a Professor at the School of Computational and Integrative Sciences, Jawaharlal Nehru University, New Delhi since August 2016. Before joining Jawaharlal Nehru University, he was in the Department of Electronics & Communication Engineering in Ambedkar Institute of Advanced Communication Technologies & Research, Delhi as a Professor from February 2011 and Associate Professor between 2008-2011. Prior to his career in academia, Dr. Kanaujia had worked as Executive Engineer in the R&D division of M/s UPTRON India Ltd.

Dr. Surendra Kumar Gupta is a Senior Faculty Member with Department of Electronics Engineering, Ambedkar Institute of Technology, Government of Delhi, India since 2002. He has authored / co-authored around 20 research papers in International Journals / Conferences. His research interests include Computer Aided Design, Wireless Communication and Micro-strip Antenna. He is a reviewer for several journals of National / International repute and Editorial Board Member of Insight-Communication Journal. He is life member of Indian Society of Technical Education, India and Associate Member of Institute of Engineers, India.

Dr. Jugul Kishor is currently working as Associate Professor at the JIMS Engineering Management Technical Campus, Greater Noida, India. His research interests include Design and Modelling of Microstrip and Dielectric Resonator based devices and Metamaterial based antenna including Circularly Polarized Antennas.　

Dr. Deepak Gangwar is working as Associate Professor at Bharati Vidyapeeth's College of Engineering, New Delhi, India. His research areas of interest include Analysis and Design of Metamaterial based Antennas, Ultra-Wideband Antennas, Metamaterial Filters and Frequency Selective Surfaces, Meta surfaces and RCS reduction.

作者簡介(中文翻譯)

班諾德·庫馬爾·卡瑙吉亞博士自2016年8月以來擔任新德里賈瓦哈拉爾·尼赫魯大學計算與整合科學學院的教授。在加入賈瓦哈拉爾·尼赫魯大學之前，他於德里安貝德卡爾高級通信技術與研究所的電子與通信工程系擔任教授，自2011年2月起任職，並於2008年至2011年間擔任副教授。在學術生涯之前，卡瑙吉亞博士曾在UPTRON India Ltd.的研發部門擔任執行工程師。

蘇倫德拉·庫馬爾·古普塔博士自2002年以來擔任德里政府安貝德卡爾技術學院電子工程系的高級教員。他已在國際期刊和會議上發表或共同發表約20篇研究論文。他的研究興趣包括計算機輔助設計、無線通信和微帶天線。他是多個國內外知名期刊的審稿人，並擔任Insight-Communication Journal的編輯委員會成員。他是印度技術教育學會的終身會員，並且是印度工程師協會的副會員。

朱古爾·基肖爾博士目前擔任印度大諾伊達JIMS工程管理技術校區的副教授。他的研究興趣包括微帶和介質共振器基礎設備的設計與建模，以及包括圓極化天線在內的超材料天線。

迪帕克·甘瓦爾博士目前擔任新德里巴哈拉提·維迪亞比特工程學院的副教授。他的研究興趣包括超材料天線的分析與設計、超寬頻天線、超材料濾波器、頻率選擇表面、超表面和雷達截面（RCS）減少。

類似商品